The Toyota 86 generally uses synthetic 0W-20 engine oil as the standard specification across its generations, with small regional variations. Always check your owner's manual for the exact grade and capacity for your vehicle and market.
Oil specification by generation
Below is a clear guide to the typical oil requirements for the two main versions of the 86, based on the engine in use.
First generation (Toyota 86 / Subaru BRZ, FA20 engine, 2012–2020)
Recommended oil: 0W-20 synthetic oil that meets ILSAC GF-5 (or higher) and API SN (or newer). This grade supports efficiency and engine protection for daily driving and mild performance use. For most markets, the oil capacity with a filter is roughly 4.5 quarts (about 4.4 liters). Always use a quality oil filter and follow the interval specified in your manual.
Second generation and GR86 (FA24 engine, 2021–present)
Recommended oil: 0W-20 synthetic oil that meets ILSAC GF-6 and API SP (or newer). The FA24-equipped GR86 continues the 0W-20 standard, with formulations optimized for the newer engine design. Oil capacity with filter is typically in the range of about 5–6 quarts, depending on the exact model and pan design; consult the owner's manual for the precise figure. Follow the manual’s recommended service intervals, which are generally around every 6,000 miles (or sooner in severe conditions).
Practical considerations
Climate, driving style, and maintenance history can influence oil choice and change intervals. In hotter climates or with frequent higher-load driving, you may benefit from using a high-quality synthetic 0W-20 and adhering to the recommended service schedule. If in doubt, ask a Toyota dealer or qualified technician for guidance tailored to your region and usage.
Conclusion
For most Toyota 86 owners, the standard oil is synthetic 0W-20. Always follow the exact grade, specification, and capacity listed in your owner's manual, use a reputable synthetic brand, and perform oil and filter changes at the recommended intervals to protect the engine across both generations.
Summary
Across its generations, the Toyota 86 predominantly uses 0W-20 synthetic oil. The older FA20 engine aligns with GF-5/SN, while the newer FA24 engine in the GR86 uses GF-6/SP. Verify the precise requirements in your manual and stick to the recommended service intervals for optimal engine health.