Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size wipers for a 2019 Honda HRV?

Front driver-side blade: 26 inches; front passenger-side blade: 16 inches; rear blade: 12 inches. These are the standard sizes you’ll likely need for a 2019 Honda HR-V.


The 2019 Honda HR-V uses a two-blade front setup and a single rear blade. Getting the right sizes ensures the wipers cover the entire windshield for clear visibility in various weather conditions. Below, you’ll find the exact measurements and some practical tips for choosing and installing replacements.


Front wiper blade sizes


The following sizes apply to the front windshield on most 2019 HR-V models. If you have aftermarket blades or a nonstandard configuration, verify by measuring the blade or consulting the owner's manual.



  • Driver-side: 26 inches

  • Passenger-side: 16 inches


When shopping, choose blades that match these lengths and consider blade technology (beam vs. conventional) for improved performance in rain and snow.


Choosing the right blade style


Front blades come in conventional, hybrid, and beam designs. For many drivers, beam-style blades provide better coverage and wind resistance, especially at highway speeds and in adverse weather.


Rear wiper blade size


The rear wiper on the 2019 HR-V is typically 12 inches. If your vehicle has a different rear configuration or you’re unsure, measure the existing blade or check the manual for the exact specification.



  • Rear: 12 inches


When replacing the rear blade, ensure you choose a model compatible with your HR-V’s rear wiper arm type and connector to ensure a secure fit and proper operation.


Rear blade replacement tips


To replace the rear blade, gently lift the wiper arm, rotate or release the old blade from its one- or two-point attachment, and snap in the new blade. Some trims use a hook-and-slot connector or a spring-loaded attachment—following the blade’s packaging instructions will help you install it correctly.


What to double-check before buying


Always confirm blade sizes on your specific vehicle by checking the owner’s manual, looking at the existing blades, or using a reputable parts retailer’s fit guide. Differences can occur due to trim level, equipment, or aftermarket replacements.


Summary


For a 2019 Honda HR-V, the standard wiper sizes are 26 inches for the driver-side front blade, 16 inches for the passenger-side front blade, and 12 inches for the rear blade. Consider blade type and installation compatibility when purchasing replacements, and verify the exact sizes for your particular vehicle if you’ve installed aftermarket parts.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.