For the 2019 Honda Odyssey, the recommended sizes are a 26-inch driver-side front blade, a 19-inch passenger-side front blade, and a 12-inch rear blade. This combination covers the typical US-market setup and is commonly used across trims.
In more detail, the Odyssey uses two different front-blade lengths to accommodate the driver’s sweeping path and the passenger area, plus a single rear blade for the tailgate window. While these sizes apply to most 2019 Odysseys, regional variations are rare but possible. When shopping for replacements, it’s wise to verify with the owner’s manual or Honda’s official parts catalog for your exact VIN and trim. Replacing both front blades at the same time helps maintain balanced wiping performance.
Front wipers
Front wipers on the 2019 Odyssey come in two different lengths to fit the sweeping area on each side of the windshield. The standard sizes are 26 inches on the driver’s side and 19 inches on the passenger side.
- Driver-side blade: 26 inches
- Passenger-side blade: 19 inches
Tip: When replacing, many owners opt to replace both front blades simultaneously to ensure even wear and consistent performance across the windshield.
Notes on fit and variation
Although 26/19 inches is standard, regional variants or updates can affect exact fit. Always confirm with the vehicle’s manual or the Honda parts catalog for your VIN before purchasing blades.
Rear wiper
The rear wiper on the 2019 Odyssey uses a single blade to clear the tailgate window. The typical length is 12 inches.
- Rear blade: 12 inches
Note: Some aftermarket blades may use different connector types; verify compatibility with your rear wiper arm before purchase.
Replacement tips
To replace the blades, follow these general steps. This guidance assumes standard U.S. market blade connectors (verify your connector type if unsure):
- Lift the wiper arm away from the glass and secure it in place.
- Depress the release tab or lever to detach the old blade from its connector.
- Attach the new blade using the correct connector type (most common is a J-hook style). Ensure it clicks into place securely.
- Lower the arm back onto the glass and test the wipe function on a dry surface, then with a little water.
If you’re uncertain about the connector type or blade length, ask a parts retailer or a Honda service technician for assistance to avoid misfits.
Summary
In brief: 2019 Honda Odyssey front blades are 26 inches (driver) and 19 inches (passenger), with a 12-inch rear blade. Always verify against your VIN and trim in the owner’s manual or Honda’s official parts catalog, and consider replacing the front pair together for optimal performance. Regular checks can help ensure clear visibility in all weather conditions.