The standard replacement wiper blade sizes for a 1999 Ford Ranger are typically 18 inches on the driver's side and 17 inches on the passenger's side. Exact sizes can vary with cab configuration, so it's wise to verify before purchasing.
The 1999 Ranger was offered in multiple body styles, including Regular Cab and SuperCab, which can influence the preferred blade lengths. While 18" and 17" are common, some configurations or aftermarket sources may list different lengths. This guide explains the typical sizes and how to confirm the exact fit for your truck.
Common blade sizes for the 1999 Ranger
Below are the sizes most often used on 1999 Ranger models. These measurements apply to the typical Regular Cab and SuperCab configurations; always confirm for your exact vehicle.
- Driver-side blade: 18 inches
- Passenger-side blade: 17 inches
These sizes cover the vast majority of 1999 Ford Ranger installations. If your vehicle uses a different arrangement, you may encounter a 16-inch passenger blade or other slight variations; measure or check OEM numbers to confirm.
Cab configurations and size variations
Wiper blade lengths can vary by cab style and windshield treatment. Some owners report minor deviations on certain SuperCab configurations, so it’s prudent to double-check against the exact truck in your garage.
How to confirm the exact size for your Ranger
To ensure you buy the correct blades, follow these steps to confirm the exact sizes for your truck.
- Check the owner's manual or Ford's parts catalog for your exact VIN; the documentation will list blade lengths.
- Inspect your current blades for length markings printed on the blade or frame.
- Safely lift the wiper arm and measure the blade length from the center of the pivot to the tip on each side.
- Use an auto parts retailer's lookup tool by year, make, model, and cab style to confirm compatible sizes.
- When replacing both blades, consider replacing with the same length per side to maintain even coverage.
By following these steps, you’ll determine the correct sizes for your 1999 Ranger and avoid fit issues such as streaking or blade contact with the windshield. If in doubt, bring an old blade to the store or use a live lookup with your exact trim and cab style.
Summary
For the 1999 Ford Ranger, the typical replacement wiper blade sizes are 18 inches on the driver’s side and 17 inches on the passenger side. Exact sizes can vary by cab configuration (Regular Cab vs. SuperCab) and production details. Always verify by consulting the owner's manual, inspecting existing blades, measuring, or using an OEM-compatible parts lookup. When in doubt, replace blades in matched pairs to ensure clean, balanced visibility.