The Hyundai Kona 2018 typically uses front blades sized at 26 inches on the driver’s side and 16 inches on the passenger side, with a rear blade of about 12 inches. These measurements apply to the US market; sizes can vary slightly in other regions, so it’s wise to confirm with your manual or parts provider before purchasing.
Front wiper blades
The Kona’s front wiper setup requires two different lengths to match the driver and passenger sides. Below are the standard replacements commonly used for the US-spec 2018 Kona.
- Driver-side: 26 inches
- Passenger-side: 16 inches
When selecting front blades, you may encounter alternatives labeled as compatible with 26"/16" pairs. Always ensure the blade type (beam vs. conventional) and connector match your vehicle’s wiper arms to avoid fitment issues.
Rear wiper blade
The rear window on the Kona uses a single wiper blade.
- Rear: 12 inches
Some aftermarket options may list similar sizes as 11–12 inches depending on the exact model year and market. Check the packaging or measure the existing blade to confirm.
How to verify the correct size
If you’re unsure or replacing after-market blades, follow these steps to confirm fit before buying.
- Check the owner's manual or Hyundai’s official parts catalog for your exact model year and market.
- Inspect the current blades on your Kona to measure their lengths directly.
- When shopping, search by year/make/model and verify the blade lengths shown (26"/16" front, 12" rear) on the product page.
- Confirm connector type (hook, pin, or bayonet) matches your wiper arms and consider adapter options if needed.
- If in doubt, bring the current blades to an auto parts store or ask a technician to confirm the correct sizes.
Following these steps helps ensure you get blades that fit properly and provide optimal visibility in adverse weather.
Summary
For a Hyundai Kona 2018, the standard sizes are 26 inches for the driver-side front blade, 16 inches for the passenger-side front blade, and 12 inches for the rear blade. Always verify with your manual, current blades, or a trusted parts retailer, since regional variations and trim differences can affect fitment.