Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size wiper blades for Honda CR-V 2021?

For a 2021 Honda CR-V, the standard front wipers are 26 inches on the driver’s side and 17 inches on the passenger’s side, with an 11-inch rear blade.


In practice, sizes can vary by trim level or regional market, and some aftermarket packages use slightly different lengths or 2-in-1 beam blades. Always confirm by measuring the blades or checking the owner’s manual or VIN-specific parts lookup before buying. Below is the typical sizing to help you start your search.


Front wiper blade sizes


Because the CR-V uses two different lengths on the front, the sizes are listed for the driver-side and passenger-side blades.



  • Driver-side: 26 inches

  • Passenger-side: 17 inches


Note: Some aftermarket options use different length pairs, but the stock configuration for most 2021 CR-V models is 26" and 17" on the front. Verify compatibility with your specific vehicle if you’re shopping outside OEM specifications.


Rear wiper blade size


CR-V’s rear window uses a single blade on most models.



  • Rear: 11 inches


rear blade sizes can vary slightly by market or trim; always confirm with your vehicle’s VIN or owner's manual if you’re unsure.


How to confirm exact sizes for your car


Vin-specific parts lookup is the most reliable method. You can:



  • Check the owner’s manual or the door jamb sticker for recommended sizes.

  • Enter your VIN on the manufacturer’s parts site or a reputable auto parts retailer.

  • Measure current blades from end to end to confirm length.


If you replace with non-OEM blades, consider maintaining the same lengths to avoid interference with the windshield or hood.


Tips for choosing wiper blades


Consider blade design (conventional vs. beam), climate, and budget. Beam blades often provide better contact at high speeds and in rain, while conventional blades are typically cheaper.



  • Beam/water-shedding design tends to perform better in all-weather conditions.

  • Choose blades with a compatible adapter system for easy installation.


Always replace wipers in pairs on the same axle when possible to maintain even contact.


Where to buy and how to install


Most auto parts stores, retailers, and Honda dealerships carry 26" and 17" front blades and an 11" rear blade for the 2021 CR-V. Installation is usually straightforward, requiring removal of clamps and clipping on the new blades. If you're unsure, seek professional installation.


Be sure to recycle or reuse any old connectors if compatible with the new blades.


Summary


For a 2021 Honda CR-V, the typical wiper setup is 26 inches on the driver’s side, 17 inches on the passenger side, and 11 inches for the rear blade. Always verify with your VIN or door jamb sticker, as regional variants may differ.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.