Front driver-side: 26 inches; front passenger-side: 18 inches; rear: 12 inches. Sizes can vary by year and market; verify with the owner's manual or Genesis parts catalog.
In practice, these dimensions are common for many GV70 models, but exact lengths can differ depending on production year and region. This article outlines the typical sizes and explains how to confirm the correct blades for your vehicle.
Front wiper blade sizes
This list provides the baseline front blade lengths used on most Genesis GV70 SUVs. Always check your exact build to ensure a perfect fit.
- Driver-side front blade: 26 inches
- Passenger-side front blade: 18 inches
Conclusion: Use these measurements as a starting point, but verify with your VIN or the owner's manual, since some years or markets may deviate from the standard sizes.
How to verify the exact size for your GV70
To ensure you purchase the correct blades, use one of these verification methods:
- Check the vehicle’s owner’s manual or the Genesis official parts catalog for your exact year and market.
- Look up blades using your VIN on Genesis or authorized parts retailer sites, which filter options by vehicle.
- Remove and measure the current blades: measure each blade length with a ruler or tape measure to confirm inches.
Conclusion: After confirming, buy blades that match the precise lengths and come with the appropriate adapters for your GV70.
Rear wiper blade size
The GV70’s rear window wiper is typically serviced with a single blade. The common length is:
- Rear blade: 12 inches
Conclusion: If your GV70 has a different rear blade length due to a specific year, trim, or market variation, verify with a parts diagram or manual before purchasing.
Summary
The Genesis GV70 generally uses a 26-inch driver-side front blade, an 18-inch passenger-side front blade, and a 12-inch rear blade. Given possible year-to-year or regional variations, always confirm the exact sizes via the owner’s manual or Genesis parts lookup for your specific vehicle. For best results, consider replacing both front blades at the same time and ensure compatibility with your wiper arm type.


