The Crosstrek typically uses a 26-inch driver-side front blade and a 17-inch passenger-side front blade, with a smaller rear blade around 10 inches. Exact sizes can vary by model year and trim, so it’s best to double-check your vehicle’s manual or measure the blades on your car.
Over its two generations, Subaru adjusted front-blade sizes slightly. The first-generation Crosstrek (2012–2017) commonly used a 26-inch driver blade and a 16-inch passenger blade, while most modern Crosstreks (2018–present) use a 26-inch driver blade and a 17-inch passenger blade. Always confirm the size for your specific year and trim to ensure a proper fit.
Front wiper blade sizes
Below are the typical front-blade size pairs by Crosstrek generation. Use these as a starting point, but verify against your model year.
- 2012–2017 Crosstrek (first generation): Driver 26 inches, Passenger 16 inches
- 2018–present Crosstrek (second generation): Driver 26 inches, Passenger 17 inches
In all cases, confirm by checking the owner’s manual, the imprint on the blade packaging, or by measuring the blade lengths on your vehicle. If you’re replacing both blades, some retailers offer a two-blade kit sized for that front set.
Rear wiper blade sizes
Rear wiper blade sizes for the Crosstrek are smaller than the front and tend to be around 10 inches, though some years or trims may use a slightly different size. Always verify for your exact year and configuration.
- 2012–2017 Crosstrek: Rear blade typically about 10 inches
- 2018–present Crosstrek: Rear blade typically about 10 inches (some trims/markets may use 11 inches; verify)
Because rear-blade sizing can vary by year and market, checking the specification for your exact Crosstrek is safest before purchasing.
How to confirm your size
To ensure you buy the correct wipers, you can:
- Consult the owner’s manual or the sticker on the current blades—these often list the size.
- Measure the blade length from tip to tip, including any curved or tabbed sections.
- Ask a parts associate at an auto parts store with your vehicle year, make, and model, or use an online parts lookup tool specific to Subaru Crosstrek.
If you’d rather not measure, buying a 26-inch driver and 17-inch passenger front pair is a reliable choice for most 2018–present Crosstreks, with a 10-inch rear blade in many cases. Always verify for your exact year to avoid returns.
Summary
For most modern Crosstreks, replace the front blades with 26 inches on the driver side and 17 inches on the passenger side, while older models used 16 inches on the passenger side. The rear blade is typically around 10 inches, though some years may vary. When in doubt, confirm with your owner’s manual or a trusted parts retailer to ensure a precise fit.