The 2019 Honda CR-V uses 26-inch driver-side and 17-inch passenger-side front wiper blades, with an 11-inch rear blade. This article explains the sizes and how to verify them for your vehicle.
Front wiper blades
The following sizes are the typical OEM specifications for the front wipers on most 2019 CR-V models. Confirm if your exact configuration differs by region or trim.
- Driver-side: 26 inches
- Passenger-side: 17 inches
These dimensions correspond to Honda's standard front-wiper setup for the 2019 CR-V. If you replace blades in pairs, ensure the driver and passenger sides match these lengths.
Rear wiper blade
The rear blade on the 2019 CR-V is smaller and is commonly 11 inches. Regional variations are unlikely, but it’s wise to verify if you’re unsure.
- Rear: 11 inches
Rear wiper sizes can vary by market or minor model updates, so double-check against your owner's manual or the blade packaging if you’re uncertain.
How to verify your specific blade size
To be certain of the exact blades for your vehicle, use one of these verification methods before buying replacements.
- Check the owner's manual for the recommended blade sizes by location (driver, passenger, rear).
- Inspect the labels on the existing blades or the packaging of new blades for size information.
- Measure the current blades with a tape measure if you have access to the old blades removed from the vehicle.
- Consult Honda's official parts diagram or enter your year, make, and model on a reputable auto parts retailer’s site for fitment confirmation.
Verifying sizes helps prevent incorrect purchases and ensures optimal visibility when using the wipers.
Summary
For a 2019 Honda CR-V, the standard sizes are front driver 26 inches and front passenger 17 inches, with a rear blade of 11 inches. Always confirm with the owner's manual, the blade labeling, or a trusted parts database to accommodate any regional or trim variations.