The 2019 Dodge Durango uses different lengths for the front blades and a separate size for the rear blade: driver-side front blade is 24 inches, passenger-side front blade is 20 inches, and the rear blade is typically 11 inches. This guide walks you through the exact sizes and how to verify them for your vehicle.
Front Wiper Blade Sizes
The Durango’s front wipers come in two different lengths. Replace both sides with the correct sizes to ensure full windshield coverage.
- Driver-side blade: 24 inches
- Passenger-side blade: 20 inches
Using the recommended 24" and 20" blades ensures optimal wipe coverage on most 2019 Durango windshields. Some vehicles produced in different regions or with aftermarket configurations may vary slightly.
Rear Wiper Blade Size
The rear window uses a single, shorter blade. Verify the length to ensure proper fit and rear visibility.
- Rear blade: 11 inches
Most 2019 Durangos use an 11-inch rear blade, though a few trims or aftermarket options might differ. Always confirm with your current blade or parts lookup.
How to Confirm Exact Sizes
Because blade lengths can vary by production run or aftermarket replacements, it’s best to double-check for your specific vehicle.
Check the Owner’s Manual and Current Blades
Consult the Durango’s owner’s manual or inspect the label on your current blades to confirm the exact lengths before purchasing replacements.
Use a Parts Lookup or VIN
Enter your vehicle’s VIN or year/trim in an OEM parts database or retailer site to retrieve the exact blade sizes recommended for your Durango.
Measure If Replacing Yourself
If you’re unsure, remove one blade and measure its length from end to end to ensure you buy the correct size for each position.
Replacement Options and Tips
When selecting blades, consider compatibility (framed vs. frameless), climate considerations (all-season blades), and the ease of installation for the Durango’s front and rear systems.
Summary
For the 2019 Dodge Durango, the front driver-side blade is 24 inches, the front passenger-side blade is 20 inches, and the rear blade is 11 inches. Always verify against your vehicle’s manual, current blades, or a VIN-based parts lookup to ensure a precise fit, as variations can occur by production run or aftermarket replacements.