Quick answer: The 2018 Camry typically uses 26-inch driver-side and 17-inch passenger-side front wiper blades, with a 12-inch rear blade on models that have a rear wiper. Always verify against your exact trim or market if in doubt, as configurations can vary slightly.
In more detail, the 2018 Toyota Camry underwent a mid-cycle refresh that kept the front-wiper sizing consistent across most trims, while the rear-wiper setup depends on whether your specific vehicle is equipped with a rear window wiper. This guide covers the common sizes used on the majority of 2018 Camry sedans sold in the United States and many other markets.
Front wiper blade sizes
The following front blade sizes are standard for the 2018 Camry across common trims, providing a reliable replacement path for most owners.
- Driver-side: 26 inches
- Passenger-side: 17 inches
When ordering front blades, choose a 26-inch blade for the driver side and a 17-inch blade for the passenger side. If you’re using aftermarket blades, ensure the connectors match your wiper arm type (most use the J-hook or pinless style).
Rear wiper blade size
Most 2018 Camry sedans equipped with a rear wiper use a 12-inch rear blade. If your model has a rear wiper, this is the typical length you’ll need.
- Rear: 12 inches
If your Camry variant does not have a rear wiper, this size note does not apply. Always confirm by inspecting the existing blade or consulting the owner’s manual or parts catalog for your exact market and trim.
How to confirm your exact sizes
To be sure you buy the correct blades, check the current blades for length and connector type, measure from tip to tip, or consult Toyota’s official parts site or your owner’s manual. Blade connection styles can include J-hook, Pk/Pinless, or optional adapters, so matching the connector is important for a secure fit.
Summary
For the 2018 Toyota Camry, plan for front blades of 26 inches (driver) and 17 inches (passenger), with a 12-inch rear blade if your car has a rear wiper. Always verify with your trim and market, and consider checking the connector type when replacing blades to ensure a proper fit.