The 2019 Dodge Charger uses a 24-inch driver-side front wiper and a 20-inch passenger-side front wiper. The model typically does not include a rear wiper. For best results, use blades in these lengths from a reputable brand, and verify fit with your owner's manual or door jamb sticker.
Blade sizes can vary by trim or aftermarket modifications, so it's wise to confirm the exact sizes for your car before buying replacements. You can check the driver's door jamb sticker or the official owner's manual for the recommended blade lengths.
Front Wiper Sizes
The front blades are sized to provide full coverage across the Charger’s curved windshield, using two lengths to match sweep patterns.
- Driver-side blade: 24 inches
- Passenger-side blade: 20 inches
Using these two blade lengths will generally ensure clean, streak-free visibility across the windshield under most driving conditions.
Rear Wiper Status
The 2019 Dodge Charger does not come with a rear windshield wiper on most configurations, so you typically do not need to purchase a rear blade for this model.
How to replace the wipers
If you’re replacing the blades yourself, follow these general steps to ensure a proper fit and secure installation.
Before you begin, confirm the blade type (hook, pin, or side-lock) that matches your Charger’s wiper arms and have the correct lengths on hand: 24 inches for the driver side and 20 inches for the passenger side.
- Lift the wiper arm away from the windshield until it locks in place.
- Press the release tab on the blade assembly and slide the old blade out of the hook or connector.
- Attach the new blade by sliding it into the hook/connector until it clicks into place.
- Lower the wiper arm back to the windshield and gently press to ensure proper seating.
- Test the wipers with the windshield briefly to confirm smooth operation and alignment.
Tip: Clean the wiper blades and the windshield margins before installation to maximize performance and reduce streaking. If you have a different trim or aftermarket blade with a nonstandard connector, consult the blade manufacturer’s instructions or an auto parts specialist for the correct adapter.
Summary
In summary, for a 2019 Dodge Charger, use a 24-inch blade on the driver side and a 20-inch blade on the passenger side for the front windshield. There is typically no rear wiper on this model. Verify sizes on the door label or in the owner’s manual if you’re unsure, and follow the simple replacement steps to install the blades correctly.