Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size battery does a 2019 Honda Pilot key fob take?

The key fob for a 2019 Honda Pilot typically uses a CR2032 3-volt lithium coin battery.


In most Pilot fobs, this standard coin cell powers remote entry and panic functions. If your fob looks different or you have an aftermarket or regional variant, verify the exact size by inspecting the battery compartment or consulting the owner's manual or a Honda dealer.


Identifying the right battery for your fob


Before replacing, confirm the correct battery size to avoid mismatches. The CR2032 is the general standard, but rare regional editions may use a different coin cell.



  • CR2032 — 3V lithium coin cell; the most common size for 2019 Pilot key fobs

  • CR2025 — 3V lithium coin cell; less common for Pilot fobs and may not fit if the housing differs

  • CR1632 — 3V lithium coin cell; very rare for this model


Note: If unsure, check the size printed on the current battery or refer to your owner's manual or a Honda dealer for confirmation.


How to replace the battery


Here are the typical steps for swapping in a new battery without damaging the fob:



  • Use a small flathead screwdriver or a gentle pry tool to separate the two halves of the fob, starting at the seam

  • Take out the old battery and observe the orientation (positive side usually faces up)

  • Insert the new CR2032 (or the correct size) with the correct polarity

  • Snap the halves back together and test the remote functions


Pro tip: If the fob’s buttons feel loose or a test fails, re-check the battery orientation and ensure the contacts are clean and undamaged.


Tips for testing and care


Test the fob by locking/unlocking doors and starting the engine if your Pilot is keyless-start. Extreme temperatures and moisture can affect fob performance, so handle and store properly.


Where to buy the right battery and warranty notes


CR2032 batteries are widely available at auto parts stores, battery retailers, and Honda parts departments. If you’re unsure or the fob remains unresponsive after replacement, contact a dealer for a quick diagnostic or battery replacement service.



  • Standard battery size for most 2019 Pilot key fobs: CR2032

  • Availability: widely stocked; bring your fob to ensure compatibility if testing


Bottom line: For the 2019 Honda Pilot key fob, expect a CR2032 battery, with exact size verified by the fob itself or the manual.


Summary


In short: The 2019 Honda Pilot key fob most often uses a CR2032 3V lithium coin cell. Verify the size with the fob’s battery compartment or the manual, replace following the steps, and test the fob after resealing.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.