The Honda Fit Sport 2020 uses front blades 26 inches on the driver's side and 16 inches on the passenger side, with a 10-inch rear blade. This pairing is standard for this model year in most markets.
In this article we break down the exact sizes, how to verify the correct blade types for your specific configuration, and practical tips for replacement. Sizes can vary by market or trim, so always check your owner’s manual or the blade packaging to confirm before purchasing.
Front windshield wipers
The front blades sweep the driver's side with a longer length to maximize visibility and the passenger side with a shorter length. The typical sizing for the 2020 Fit Sport is 26 inches on the driver side and 16 inches on the passenger side.
- 26 inches — driver’s side blade
- 16 inches — passenger-side blade
When replacing, choose blades with a compatible connector type for your wiper arms (common options include J-hook and pin adapters). If your current blades use a different connector, look for compatible replacements or adapters.
Rear windshield wiper
The rear blade on the 2020 Honda Fit Sport is typically about 10 inches in length, designed to clear the rear window without overhang.
- 10 inches — rear blade
Verify the connector type on your rear blade as well; most rear wiper setups use a straightforward single-arm connector. Rear blade replacements commonly list 10" length and compatibility with Honda Fit rear arms.
Replacement and verification
To confirm exact lengths for your vehicle, consult the owner’s manual or the blade packaging. If you’re unsure, you can measure the blade length by removing it and measuring end-to-end, or compare with a size reference chart at a parts retailer.
How to replace front and rear blades
Follow these general steps to replace blades safely. Lengths and connectors vary by brand, but the process is similar across most models.
- Park the car on a level surface and apply the parking brake. Lift the wiper arm away from the windshield until it stays upright.
- Release the old blade from the connector by pressing the release mechanism or sliding it out of the adaptor.
- Attach the new blade by inserting the connector into the wiper arm until it clicks into place, ensuring it is oriented correctly.
- Lower the wiper arm back onto the windshield and test for proper contact and clearance.
- Repeat for the other front blade and the rear blade, if applicable.
Tip: clean the windshield frame and the blades during replacement to remove debris that could scratch the glass.
Summary
For a 2020 Honda Fit Sport, the recommended sizes are 26" driver-side front blade, 16" passenger-side front blade, and a 10" rear blade. Always verify connector types and market-specific variations by checking the owner's manual or blade packaging, and consider replacing both front blades at once for consistent performance. Regular checks help ensure clear visibility and safe driving.