The driver’s side wiper is typically 26 inches and the passenger’s side is usually 17 inches. Some model years use 18 inches on the passenger side, so it’s important to verify your exact year and trim.
Common front wiper sizes
The following sizes reflect what you’re most likely to encounter on Highlander models across recent years. Use this as a starting point, then confirm with your manual or the packaging when you buy.
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches (some years use 18 inches)
These sizes cover the vast majority of Highlanders, but exact specs can vary by year and trim. If in doubt, check the owner’s manual or inspect the label on your current blades.
Note on rear wipers
Some Highlander trims include a rear wiper, which uses a different length from the front blades. The rear blade length varies by year and model, so consult the manual or a parts catalog to confirm if your vehicle has one and what size it requires.
How to verify the exact size for your Highlander
To ensure you order the correct blades for your specific vehicle, use these verification steps. They help you avoid buying the wrong length or incompatible blades.
- Check the owner’s manual or Toyota’s official parts catalog for your exact year, model, and trim.
- Look at the current blades for printed size markings (often on the blade itself or the packaging).
- Measure the blade length with a tape measure or ruler from end to end if you must confirm manually.
- When in doubt, visit a local auto parts store or use an online fitment tool by entering your vehicle’s year, model, and trim or VIN.
Following these steps will help you purchase the correct blades for reliable, clear visibility while driving.
Tips for replacement and maintenance
For best performance, replace both front blades at the same time, especially if one blade is showing wear while the other remains new. Choose quality blades suited to your climate (winter-rated blades perform better in cold conditions) and inspect wiper blades regularly for streaking or skipping. In icy or snowy weather, consider lifting blades off the windshield during overnight freezes to prevent tearing. If your Highlander has any unusual fitment, always refer to the manual or a Toyota parts specialist.
Summary
In general, a Toyota Highlander uses a 26-inch driver-side blade and a 17-inch passenger-side blade, with some years using 18 inches on the passenger side. Always confirm your exact sizes by checking the owner’s manual, blade packaging, or using a reputable fit tool with your vehicle’s year and trim. Proper sizing ensures optimal visibility and safer driving.