For a 2010 Honda CR-V, use 26-inch driver-front, 17-inch passenger-front, and 12-inch rear blades.
These are the standard replacement lengths commonly listed for the 2010 CR-V. Front blades come in two different lengths to optimize sweep across the windshield, while the rear blade is shorter to fit the smaller rear window. Always verify fitment for your exact vehicle using the owner's manual or a trusted parts retailer, since regional specs or trim variations can affect the correct sizes.
Front windshield wipers
The CR-V uses two different front blade lengths to cover the windscreen effectively. The sizes below are typical for the 2010 model year.
Common front blade sizes for the 2010 CR-V
Before listing the sizes, note that you should confirm the fit for your VIN. The typical front blade lengths are:
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
These front blades replace OEM types and are widely available from aftermarket brands. When shopping, ensure the blades come with adapters or confirm that your wiper arms use a compatible connector style.
In short, the front pair consists of one long blade (26") and one shorter blade (17").
Rear windshield wiper
The rear wiper on the 2010 CR-V is shorter, reflecting the smaller sweep area of the rear window.
Rear blade size
Common rear wiper size for the 2010 CR-V is 12 inches. Some regional listings may show 12" as standard, while a few markets might offer 13" in rare cases; verify by checking the current blade or packaging for your vehicle.
When purchasing, confirm the connector type and whether adapters are included for your specific rear wiper arm.
How to confirm fit before purchase
To avoid buying the wrong blades, you can:
- Check the owner’s manual or a official parts diagram for your exact VIN.
- Measure the current blades or take the old blade to a parts store to compare lengths.
- Look for blades labeled with the correct length pairs (26" / 17" front, 12" rear) and verify connector compatibility.
After-purchase verification helps ensure proper coverage and performance, especially if you’re buying aftermarket blades.
Summary
The Honda CR-V 2010 generally uses 26" driver-front and 17" passenger-front blades, plus a 12" rear blade. Always double-check with your manual or a reputable retailer to account for regional or trim differences, and verify connector compatibility to ensure a proper, secure fit.