Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size windshield wipers for a 2010 Nissan Murano?

Front wipers: driver’s side blade is 26 inches, passenger’s side blade is 18 inches; rear wiper blade is 11 inches. This article explains the standard sizes and how to verify them for your specific vehicle.


In this guide, we break down the typical front and rear blade sizes for the 2010 Murano, offer steps to confirm the exact measurements for your trim, and share practical tips for selecting replacement blades across major brands.


Front windshield wiper sizes


The most common front blade lengths for the 2010 Murano are listed below. Using the correct lengths ensures full coverage and avoids interference with the hood or trim.



  • Driver-side blade: 26 inches

  • Passenger-side blade: 18 inches


Choosing the right driver- and passenger-side lengths helps maintain optimal wipe quality and prevents contact with surrounding components during operation.


Rear windshield wiper size


The Murano’s rear wiper is smaller and separate from the front blades. For the 2010 model, the standard rear blade length is typically 11 inches.



  • Rear blade: 11 inches


Rear wiper blades are often sold as a single unit; make sure you select the correct length and connector style for your hatchback configuration.


How to verify the correct size for your Murano


Even though these sizes cover most 2010 Murano units, variations by trim or aftermarket replacements can occur. Here are reliable ways to confirm your exact measurements.



  • Check the owner's manual for blade size specifications.

  • Inspect the label on your current blade for length and connector type.

  • Measure the blade you replace from end to end to verify proper length.

  • Consult Nissan's official parts catalog or retailer listings using your VIN for precise sizing.


When in doubt, visit an auto parts store or a dealership with your vehicle’s VIN to ensure you get blades that fit correctly and function properly.


Notes on compatibility and blade types


Blade style matters as well. Beam (flat) blades are common modern replacements and can offer improved performance in rain and snow, while traditional frame-style blades may be cheaper. The lengths above apply to standard blade designs; if you opt for beam blades, keep the same lengths on each side as specified.


Summary


The standard front wiper sizes for a 2010 Nissan Murano are 26 inches on the driver’s side and 18 inches on the passenger’s side, with an 11-inch rear blade. Always verify against your manual, current blades, or a trusted parts retailer to confirm exact measurements for your vehicle’s trim and connector type. Properly matched sizes ensure clear visibility and reliable operation.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.