The front wiper blades for the 2019 Buick Encore are 26 inches on the driver's side and 21 inches on the passenger's side, with a 12-inch rear blade. These sizes cover the typical configuration for that model year, though always verify with your manual or retailer in case of trim differences or aftermarket adapters.
Understanding the exact blade lengths helps ensure optimal visibility and even wear. Below is the standard sizing and guidance for verifying and replacing worn blades on the 2019 Encore.
Front windshield wipers
For the front windshield, Buick typically uses two different blade lengths to cover the driver’s and passenger’s sides. This is common in compact SUVs where the driver’s side needs a longer sweep. The following sizes are the ones most commonly used by 2019 Encore owners.
Front wiper sizes (driver and passenger):
- Driver’s side blade: 26 inches
- Passenger’s side blade: 21 inches
Using the exact sizes ensures full coverage and minimizes streaking along the windshield face. If you observe skipping, judder, or streaks, blades may be worn or incorrectly sized, and replacement should restore proper performance.
How to verify and replace front blades
To replace front blades, follow these steps:
- Park the car, turn the ignition off, and gently lift the driver or passenger wiper arm away from the windshield until it locks in a vertical position.
- Press the release tab on the blade assembly to detach the old blade from the wiper frame.
- Choose a new blade with the appropriate 26-inch (driver) and 21-inch (passenger) lengths and compatible adapter type for your model.
- Attach the new blade to the wiper frame, ensure it clicks into place, then lower the arm back onto the windshield and test for coverage.
Tip: Bring the old blade or the vehicle’s VIN when shopping to ensure the correct adapter type is chosen, as some aftermarket blades use different connector styles.
Rear windshield wiper
The rear wiper blade on the 2019 Buick Encore is typically 12 inches, a common size for compact SUVs’ rear windows. If your vehicle has a different trim or aftermarket parts, measure or consult the user manual to confirm.
Rear wiper sizes and replacement steps.
- Rear wiper blade: 12 inches
Replacing the rear blade is usually simpler: lift the rear wiper away from the window, depress the locking tab, slide off the old blade, and slide the new blade into place until it locks.
Note: Always verify the connector type (bayonet, hook, or snap-fit) before purchasing a replacement blade for the rear.
How to verify and replace rear blade
To replace the rear blade, follow these steps:
- Open or lift the rear hatch to access the wiper arm from the interior or exterior, depending on your model.
- Gently twist or lift the end cap and detach the old blade by pressing the release tab.
- Install the new 12-inch blade and reattach the cap or arm cover.
- Lower the arm back and test the blade across the rear window.
Regular replacement every 6–12 months, or sooner in harsh climates, will help maintain visibility on the rear window.
Summary
For the 2019 Buick Encore, the standard windshield wiper sizes are 26 inches on the driver’s side and 21 inches on the passenger’s side for the front, with a 12-inch blade for the rear. Always verify with the owner’s manual or a trusted retailer, since some trims or aftermarket parts may require different adapters. When replacing, match blade length and connector style to ensure a secure fit and proper contact with the glass.