The rear wiper blade for most 2011 Honda CR-V models is 12 inches long (about 30 cm). While 12 inches is standard, it’s wise to confirm by checking your manual or measuring the current blade, as variations can occur by market or aftermarket setups.
Confirming the correct size
To ensure you buy the right blade, use these verification steps before making a purchase:
- Check the vehicle’s owner’s manual or service manual for the rear wiper blade specification.
- Remove the existing blade and measure its length, or compare it directly with a known 12-inch blade at a parts store.
- Consult an auto parts retailer or dealership with your year, make, and model to confirm the exact size.
Common sizes and exceptions
Common sizes and exceptions
For the 2011 CR-V, the vast majority use a 12-inch rear blade. Some markets or aftermarket configurations may list 11 inches, so verify against your specific vehicle if you encounter packaging that lists a different length.
Where to buy and what to look for
When shopping, you’ll find OEM and aftermarket options available in the standard 12-inch size. Consider the following to pick a reliable blade:
- OEM Honda rear wiper blade, typically 12 inches, guaranteed to fit without modification.
- Quality aftermarket blades in 12-inch length from brands like Bosch, Valeo, Trico, and Denso.
- Check for compatibility with your CR-V’s rear wiper arm type and review warranty/return policies in case of fit issues.
Choosing between OEM and aftermarket blades often comes down to price, availability, and warranty terms. If in doubt, starting with a reputable OEM or a well-reviewed aftermarket option is a safe bet.
Installation tips
Installing a 12-inch blade on a 2011 CR-V is straightforward. Follow these steps to ensure a secure fit and proper operation:
- Lift the rear wiper arm away from the glass until it stays in place.
- Release the old blade from its connector by pressing the release tab or lever.
- Remove the old blade from the wiper arm and clean the connector area if needed.
- Attach the new blade to the connector, ensuring it clicks into place securely.
- Lower the wiper arm back onto the glass and test the wipe to confirm proper contact and operation.
Tip: Avoid letting the wiper arm snap back onto the windshield to prevent damage; handle the arm with care during replacement.
Summary
For a 2011 Honda CR-V, the typical rear wiper blade size is 12 inches. Always verify with the owner's manual or by measuring the current blade, and choose a reliable OEM or well-regarded aftermarket blade. Installation is quick and straightforward with the right size blade.