The 2015 Toyota Camry uses 26-inch blades on the driver’s side and 17-inch blades on the passenger side for the front windshield. The sedan typically does not include a rear wiper in its standard configuration. This brief guide explains the front blade sizes and offers practical tips for replacement.
Front wiper blade sizes
To help you replace the correct blades, here are the standard front blade measurements for most 2015 Camry models.
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
In short, the front windshield in a 2015 Camry commonly requires a 26" blade for the driver side and a 17" blade for the passenger side. Always verify with your owner’s manual or the blade packaging if you’re unsure, since regional trims or aftermarket setups can vary.
Rear wiper status
For the 2015 Camry sedan, a rear wiper is not standard and is typically not present. If your specific vehicle has a rear wiper due to a regional variation or aftermarket modification, consult the owner’s manual or a dealer for the exact blade size.
Replacement tips
When replacing blades yourself, follow these steps to ensure a proper fit and clear visibility.
- Confirm blade lengths: 26 inches for the driver side and 17 inches for the passenger side.
- Lift the wiper arm away from the windshield until it is perpendicular to the glass.
- Release the old blade by pressing the release tab or clips and slide it out of the hook or connector.
- Attach the new blade by sliding it into the connector until it clicks into place.
- Lower the wiper arm back onto the windshield and test for smooth, streak-free operation.
After replacing, wipe a small area of the windshield to confirm the blades sit correctly and do not skip or chatter. If streaking occurs, recheck the attachment or consider a different blade type suited to your climate.
Summary
For a 2015 Toyota Camry, use a 26-inch driver-side blade and a 17-inch passenger-side blade for the front wipers. The sedan generally does not have a rear wiper. When replacing blades, verify lengths, follow proper attachment steps, and test for a clean sweep to maintain clear visibility in all conditions.