The front wipers for most Toyota 4Runners are 26 inches on the driver’s side and 17 inches on the passenger’s side, with the rear blade typically around 11 inches. Exact sizes can vary by model year and trim, so verify for your specific vehicle.
This article explains the typical blade sizes for common 4Runner configurations, notes possible year-to-year variations, and gives steps to confirm the correct sizes for your exact vehicle.
Front wiper blade sizes for most 4Runners
Before replacing the front wiper blades, know that the sizes are usually standard across recent generations, but some models or regional specifications may differ. Use this as a baseline and confirm with your vehicle.
- Driver's side front blade: 26 inches
- Passenger side front blade: 17 inches
Front wiper blades are the most frequently replaced, and ensuring the correct lengths helps maintain streak-free visibility and even wear.
Rear wiper blade size
The 4Runner's rear window wiper (if equipped) uses a smaller blade. The typical size is about 11 inches, though some years may vary slightly.
- Rear blade: approximately 11 inches
Rear blades are often overlooked but important for clearing the liftgate area and the rear window for rear visibility.
How to verify the exact size for your vehicle
To confirm the proper blade lengths for your specific year and trim, use one or more of these methods:
- Check the owner's manual or the windshield wiper section of the maintenance guide.
- Look up the OEM (Toyota) blade sizes using your 4Runner’s year, make, and model at an auto parts retailer or Toyota’s parts catalog.
- Measure your current blades: remove them and measure the length from end to end for each side.
- Ask a dealership parts counter or a trusted mechanic to confirm the exact sizes for your VIN.
Once you have the correct sizes, you can purchase replacement blades in combinations such as 26"/17" front and 11" rear, or opt for all-in-one units that include soft rubber blades for each position.
Tips for choosing and installing wiper blades
Fit and attachment compatibility
Ensure the blade type matches your 4Runner’s wiper arm design: most 4Runners use hook-style arms, but some variants may use pin-type connectors or specialized adapters. Check the packaging for compatibility with your wiper arms.
Installation basics
To install: lift the arm, release the old blade, attach the replacement according to the instructions, and gently lower the arm back into place. Test by wiping once to confirm proper contact and no streaking.
Summary
For most 4Runners, plan on front blades of 26 inches (driver) and 17 inches (passenger), with a rear blade around 11 inches if your model has a rear wiper. Always verify for your exact year and trim by consulting the owner's manual, checking the OEM catalog, or asking a parts specialist. Accurate sizing ensures optimal visibility and blade life.