The front driver’s side blade is 26 inches and the front passenger’s blade is 18 inches, with a 12-inch rear blade.
This article explains the standard blade sizes for the 2019 Hyundai Santa Fe, how those sizes are determined, and how to verify the exact fit for your specific trim and region. It covers front and rear blade sizes, plus practical tips for choosing the right replacements.
Front wiper blade sizes
Before replacing the front wiper blades, note that the Santa Fe uses two different sizes on the front to maximize windshield coverage. The driver’s side blade is longer to sweep a larger area.
- Driver’s side: 26 inches
- Passenger’s side: 18 inches
Using the two-blade setup helps maintain visibility across the windshield in varying weather. If your vehicle uses an aftermarket setup or a different beam style, verify the exact part numbers before purchasing.
Rear wiper blade size
The 2019 Santa Fe typically uses a single rear wiper blade, commonly measuring 12 inches. Variations can occur by region or trim, so it’s prudent to confirm by checking the old blade or the owner's manual.
- Rear blade: 12 inches
Regional variations and compatibility notes
Some markets or trims may use slightly different rear blade designs or attachment methods. When in doubt, measure the existing blade or consult a parts specialist to ensure the correct fit for your tailgate configuration.
When replacing, consider blade type (conventional vs. beam) and the method of attachment to ensure a secure fit on the rear hatch as well as effective wiping performance.
How to confirm the correct size for your Santa Fe
To ensure you purchase the right blades for your exact vehicle, use these verification steps:
- Check the owner's manual for the official blade size information.
- Inspect the current blades for length markings printed on the blades themselves.
- Use your vehicle’s VIN to pull a parts diagram from Hyundai’s official site or a reputable parts retailer.
- Ask a parts specialist to confirm the fit when purchasing blades.
Following these steps helps avoid buying the wrong size, especially if you drive a region-specific variant or have a unique trim level.
Summary
For a 2019 Hyundai Santa Fe, plan on front driver’s blade at 26 inches and front passenger blade at 18 inches, with a rear blade of 12 inches. While these sizes cover the majority of Santa Fe models, always verify against your specific trim and region using the owner’s manual or a trusted parts diagram before purchasing replacement blades.