The front windshield wipers on a 2003 Honda Odyssey typically require a 24-inch blade on the driver’s side and a 20-inch blade on the passenger’s side. If your van has a rear wiper, it usually uses an 11-inch blade.
Sizes can vary by trim or production changes, so it’s wise to confirm before buying. Checking the owner's manual or inspecting the current blades is often enough to confirm the correct lengths.
Front wiper blade sizes for the 2003 Odyssey
Use the two standard lengths below for most 2003 Odysseys. These measurements correspond to the two front wiper arms you’ll see when you open the hood.
- Driver-side front wiper blade: 24 inches
- Passenger-side front wiper blade: 20 inches
In some cases, especially with aftermarket replacements or regional specifications, lengths can differ by a small margin. When in doubt, verify with the existing blades or the manual.
Rear wiper (if equipped)
Some 2003 Honda Odyssey models include a rear window wiper. The rear blade is typically about 11 inches, but check your vehicle to be certain, as measurements can vary by market or trim.
How to verify the exact sizes for your vehicle
To ensure you purchase the correct blades for your exact car, use these verification steps before shopping:
- Check the owner’s manual and the section on wipers for the recommended sizes.
- Look at the blades currently on the vehicle for length markings or measure them with a tape measure.
- If you have the VIN, use the manufacturer’s parts finder (or a trusted auto parts retailer) to look up exact front blade lengths for your trim.
- Ask a parts specialist at a store or use an online chat service with your year, make, model, and trim if you’re unsure.
Following these steps helps avoid buying the wrong size blades and ensures optimal visibility in wet conditions.
Summary
For a 2003 Honda Odyssey, you will most commonly use a 24-inch driver-side blade and a 20-inch passenger-side blade. If your van has a rear wiper, it’s typically around 11 inches. Always confirm with the manual or by measuring the current blades to ensure a precise fit.