Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size windshield wiper does a Honda CRV use?

In most recent Honda CR-V models, the driver’s side wiper is 26 inches and the passenger’s side is 18 inches. Blade sizes can differ by model year, market, and trim, so always verify for your exact vehicle.


The question spans several generations of the CR-V as Honda updated design and components over time. Below is a practical guide to the typical sizes you’ll encounter and how to confirm the right fit for your car.


Current-generation CR-V models (2017–present)


For the fifth-generation CR-V, the standard configuration has commonly been 26-inch driver-side and 18-inch passenger-side blades across most trims and markets. Always double-check for your exact model year and regional specification.



  • Driver-side blade: 26 inches

  • Passenger-side blade: 18 inches


These are the sizes you’ll most often see on 2017–present CR-Vs in North America and many other markets. If you’re shopping used or have an unusual trim, verify with the dealer or the official parts catalog.


Older CR-V generations


Earlier CR-V generations (pre-2017) vary more widely by year and market. The safe approach is to verify rather than rely on memory, as sizes can differ by a few inches and by connector type.


How to confirm the exact size for any CR-V


Use the following steps to identify the correct wiper sizes for your specific vehicle.



  • Check the sticker on the inside edge of the driver's door jamb for recommended blade lengths.

  • Consult the owner’s manual or the official Honda parts catalog with your vehicle's year and region.

  • Measure the current blades or bring them to an auto parts store to match length and connector type.

  • Ask a dealer or service center if you’re unsure, especially for regional variants.


Following these steps ensures you purchase the right fit for any CR-V, regardless of generation or market.


Summary


For most 2017–present Honda CR-Vs, the recommended blade sizes are 26 inches on the driver side and 18 inches on the passenger side. Older generations vary more, so verify using your owner’s manual, door jamb sticker, or a trusted parts catalog before buying replacements.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.