The 2010 Honda CR-V uses two factory tire sizes depending on trim: LX models wear 205/70R16 tires, while EX and EX-L trims use 225/65R17 tires.
Understanding these sizes helps ensure proper fitment, ride quality, and safety. Below is a detailed guide to the OEM sizes, market variations, and guidance for replacements or upgrades.
Factory tire sizes by trim
The following sizes reflect the original equipment for US-market CR-Vs in 2010. If your vehicle is from another market, verify the exact specification on the door placard or in the owner's manual.
- LX — 205/70R16 tires on 16-inch wheels
- EX — 225/65R17 tires on 17-inch wheels
- EX-L — 225/65R17 tires on 17-inch wheels
For most vehicles, these sizes align with the wheel size and trim level described above. If your CR-V has different wheels due to an upgrade or a regional specification, sizes may vary from the above.
Notes by market
The two sizes above cover the common US configuration. In Canada and some other international markets, Honda sometimes used the same sizes or minor variations; always confirm by checking the door placard or the vehicle’s manual.
Upgrading or replacing tires: what to know
When replacing tires on a 2010 CR-V, you should aim to match the OEM size, or use a size that aligns closely with the original diameter to avoid affecting speedometer accuracy and drivetrain systems.
- Keep the overall tire diameter within about ±3% of the OEM size for your trim.
- Ensure the load index and speed rating meet or exceed OEM specifications.
- Choose all-season tires suited to your climate; in snowy regions, consider dedicated winter tires on a separate wheel setup.
Using a significantly wider or taller tire can impact ABS, traction control, steering, and ride quality. If in doubt, consult a tire professional or your Honda dealer.
How to verify your current tire size
To confirm the exact size installed on your CR-V, check both the tire sidewall and the door-jamb placard. The sidewall will show the size (for example, P205/70R16 or P225/65R17), while the placard lists the OEM size for your specific vehicle.
- Read the sidewall to identify the size code (P205/70R16 or P225/65R17).
- Check the driver’s door placard for the OEM specification.
- Verify wheel size on the current wheels to confirm trim alignment (16-inch vs 17-inch).
If you plan to mix sizes or switch to a non-OE wheel setup, consult a tire professional or a Honda service center to ensure compatibility and safety.
Summary
For the 2010 Honda CR-V, the standard tire sizes are 205/70R16 for LX models and 225/65R17 for EX and EX-L models, reflecting the shift from 16-inch to 17-inch wheels on higher trims. Use these OEM sizes as a baseline when replacing tires, and maintain appropriate diameter, load index, and speed rating if upgrading. Always verify the exact specification on the door placard or in the owner’s manual and seek professional guidance if considering size changes or aftermarket wheels.