The wheel studs on a 2016 Honda Accord are 12 mm in diameter with a 1.5 mm thread pitch (M12 x 1.5).
In practice, this means the car uses a 5-lug wheel with a bolt pattern of 114.3 mm (5x114.3) and lug nuts that thread onto M12 x 1.5 studs. Note that this refers to wheel fasteners, not engine or exhaust studs, so when replacing wheels or hardware, use OEM-spec parts or equivalents designed for 5x114.3 with M12 x 1.5 threads.
Wheel stud specifics for the 2016 Accord
Before listing the key specifications, here is a concise overview of the most relevant details you’ll need when inspecting, replacing, or buying wheels and lug nuts for this model.
- Stud diameter: 12 mm (M12)
- Thread pitch: 1.5 mm (M12 x 1.5)
- Bolt pattern: 5 x 114.3 mm
- Lug nut seat type: typically 60-degree conical seat
These specifications help ensure you purchase the correct lug nuts and compatible wheels for your 2016 Accord. Always confirm your exact trim and aftermarket modifications if any, as there can be variations.
How to verify your vehicle’s exact stud size
If you’re unsure or have aftermarket wheels, use these practical checks to confirm the correct size for your car.
- Check the owner's manual or a Honda dealer parts diagram for the exact wheel stud size for your VIN and trim.
- Measure the current stud with calipers to verify diameter and, if needed, compare thread pitch with a thread gauge.
- Bring a known-good lug nut or wheel to an auto parts store to match the thread size and seat type.
By confirming these details, you can avoid mismatched wheels or lug nuts that could affect safety or performance.
Summary
For a 2016 Honda Accord, the wheel studs are M12 x 1.5 (12 mm diameter with a 1.5 mm thread pitch), paired with a 5x114.3 mm bolt pattern and typical 60-degree conical lug nut seats. Always verify with your specific trim and any aftermarket wheels to ensure compatibility and safety.