The rear wiper blade size for the Honda Fit is typically 13 inches (about 330 millimeters).
Across generations from the early Fit to the latest Jazz branding in some markets, the rear window has a compact wiper blade. This guide explains the standard size, how to verify for your exact year and market, and tips for selecting and installing the replacement blade.
Common rear wiper blade size for Honda Fit
Before you buy a replacement, here is the most important size to know and how to confirm it for your car.
- 13 inches (approximately 330 mm) is the typical rear blade length used on the Honda Fit across many model years.
- Some regional variants or trims may adopt a slightly different size; always confirm with your manual or OEM parts diagram before purchasing.
Conclusion: For the vast majority of Honda Fit models, use a 13-inch rear wiper blade. If in doubt, verify the exact size on your current blade or by checking the vehicle’s parts diagram.
How to verify for your specific model
To ensure you purchase the correct blade for your exact car, use one of these verification methods.
- Check the current blade for any size printed on the label (some blades have the length indicated).
- Measure the blade length from tip to tip with a tape measure when the blade is removed from the arm.
- Consult the Honda owner's manual or the official Honda parts diagram for your VIN/year to find the exact replacement blade length.
- When shopping, search for “Honda Fit rear wiper blade 13 in” or your local market equivalent to ensure compatibility with the mounting style.
Conclusion: Verifying the size before purchasing helps prevent returns and ensures a proper fit.
Installation tips for a rear wiper blade
Replacing a rear blade is usually quick and simple, but a few cautions can prevent damage to the wiper arm or the glass.
- Lift the wiper arm away from the glass gently to create space for blade removal.
- Depress the release tab on the blade connector and slide the old blade off the arm.
- Attach the new blade by sliding it onto the arm until it clicks into place, then lower the arm back to the glass slowly.
- Test the wiper to ensure it covers the intended area and the blade clears the window without skipping.
Conclusion: With the right blade, replacement is quick and restores proper rear visibility.
Summary
In short, the Honda Fit commonly uses a 13-inch rear wiper blade (about 330 mm). Always verify with your manual, current blade, or OEM parts diagram, as regional differences can occur. Measuring or confirming the OEM part number is the safest approach when shopping.