The 2017 Honda Civic supports wheel sizes from 16 to 18 inches in most trims, with 19-inch wheels available on the Civic Si. The official bolt pattern is 5x114.3 mm, the center bore is 64.1 mm, and sticking to factory-like offsets helps avoid rubbing or clearance issues.
OEM wheel sizes by trim
The wheel diameters listed below reflect typical factory configurations for the 2017 Civic. Exact sizes can vary by market or optional packages, so always confirm with the car’s VIN or the dealer if you’re unsure.
- LX and EX: 16-inch wheels (commonly 16x6.5J)
- EX-T, EX-L, and Touring: 17-inch wheels (commonly 17x7J)
- Sport: 18-inch wheels (commonly 18x7.5J)
- Civic Si: 19-inch wheels (commonly 19x8J)
OEM wheel sizes above are typical references for the 2017 Civic lineup. Always verify your specific vehicle’s wheel spec on the door placard or in the owner's manual, as regional variations can occur.
Aftermarket fitment considerations
If you’re looking to go beyond stock sizes, use the following guidelines to evaluate aftermarket rims for a 2017 Civic.
- Confirm the bolt pattern and center bore: 5x114.3 mm and 64.1 mm center bore. Use hub-centric rings if the wheel’s bore is larger.
- Check offset and width: OEM offsets typically fall in a practical range for Civics (roughly +40 to +50 mm, depending on width). Going too far outside this range can cause rubbing or altered suspension geometry.
- Match overall diameter: Aim to keep the overall tire diameter within about ±3% of the stock to avoid speedometer errors and maintain proper ABS and traction control function.
- Brake clearance and calipers: Ensure the chosen wheel clears the brake calipers and rotor hats; wider wheels can interfere with brakes on some trims.
- Quality and compatibility: Prefer wheels that are rated for street use, with appropriate load ratings, and ensure proper lug-nut size and seat type (conical vs. ball-seat) for Honda wheels.
By following these checks, you can safely expand your rim size within practical limits. If in doubt, consult a tire and wheel professional or your Honda dealer before purchasing.
Practical tips and common pitfalls
Beyond the numbers, there are practical considerations to keep in mind when changing rims on a 2017 Civic.
- Avoid mixing rims with very different diameters on the same axle, as it can affect traction control and ABS.
- Lowering springs or coilovers may require recalibration or fender rolling to prevent rubbing with larger wheels.
- Always recalculate tire sizes if you’re changing both rim diameter and width to maintain similar overall diameter.
- Have a professional mount and balance wheels to prevent vibration and ensure proper lug torque.
Summary
For the 2017 Honda Civic, you can choose from 16" to 18" rims as the standard range, with 19" rims reserved for the Civic Si. The essential fit criteria are a 5x114.3 mm bolt pattern, a 64.1 mm center bore, and offsets that keep the wheel close to factory geometry to avoid clearance issues. When venturing into aftermarket rims, verify bolt pattern, center bore, offset, width, and overall diameter, and seek professional guidance if you’re unsure.