The standard oil filter for most 2014 Honda CR-V models with the 2.4-liter engine is Honda part number 15410-PLM-A01. Some catalogs also show 15410-PLM-A02 as a revised option, so it’s wise to verify against your vehicle’s VIN and engine code.
Understanding the 2014 CR-V and its oil filter
The 2014 CR-V uses a 2.4-liter four-cylinder engine. The oil filter is chosen to fit this engine family, and sometimes revisions or market-specific variants appear in parts catalogs. Because there can be small differences by production run or region, a quick verification is recommended before purchase.
Official part numbers and common alternatives
Below is a quick guide to the official Honda part number and an alternate revision you might encounter when shopping. Use the OEM part whenever possible for guaranteed fit and filtration quality.
- Honda Genuine Oil Filter: 15410-PLM-A01 (primary OEM option for the 2012–2016 CR-V 2.4L)
- Updated revision: 15410-PLM-A02 (listed in some catalogs as a revised filter; verify compatibility with your specific vehicle)
Before listing the numbers, this paragraph highlights what you’ll find in catalogs and why these two options appear.
When shopping, also be aware that aftermarket filters exist that fit the 2.4L CR-V. Always check the packaging or catalog entry to confirm that the filter fits the 2012–2016 Honda CR-V 2.4L and matches your engine code.
How to confirm the correct filter for your vehicle
To ensure you select the right filter, perform a quick verification using these steps:
- Check your vehicle's VIN and engine code in the owner's manual or on the vehicle plate, then reference Honda's parts database or dealer portal.
- Look at your current oil filter for the part number, if accessible, before removing it.
- Consult the dealer parts counter or trusted parts retailers with your vehicle year, model, and engine to confirm a compatible filter.
By following these steps, you reduce the risk of ordering the wrong filter and ensure proper filtration for your engine.
Where to buy and installation considerations
Filters for the 2014 CR-V are widely available at Honda dealerships, auto parts stores, and online retailers. When replacing, use a new gasket/seal and proper torque for the oil filter cap if applicable; consult the service manual for the exact torque specification and procedure. It’s also a good practice to replace the drain plug gasket if it’s worn.
Summary
The 2014 Honda CR-V with the 2.4L engine typically uses Honda part number 15410-PLM-A01 for the oil filter, with 15410-PLM-A02 listed as an updated revision in some catalogs. Always verify with your vehicle’s VIN, engine code, and current parts catalog to ensure you have the correct filter. When in doubt, consult a Honda dealer or trusted parts retailer.