The rear wiper blade for a 2019 Honda Odyssey is 11 inches long. This is the standard size used on this model year, and it’s the most common option you’ll find when shopping for replacements.
This article provides the size you need, how to verify compatibility, and practical tips for choosing between OEM and aftermarket blades, along with step-by-step replacement guidance.
Size and compatibility basics
Key facts to know when shopping for a replacement blade:
- Size: 11 inches (about 28 cm) for the rear blade on most 2019 Odyssey models.
- Compatibility: look for an 11" rear blade with a connector style that matches your wiper arm (OEM and many aftermarket blades are available in 11" with common connector options).
- Blade type: options include traditional and beam-style blades; choose based on your climate and preferred wiping performance.
- Replacement considerations: check packaging or product details to ensure the blade is designed for a 11" rear fit and the correct connector type for your vehicle.
In practice, the majority of 2019 Odysseys will use an 11" rear blade, but it’s wise to verify by measuring the current blade or consulting the owner’s manual or parts diagram if you’re unsure.
How to replace the rear blade
Follow these steps to replace the rear wiper blade safely and effectively:
- Lift the rear wiper arm away from the glass so it stays in a raised position.
- Locate the release mechanism on the blade’s connector and depress or slide it to detach the old blade from the arm.
- Take the new 11" blade and slide or snap it onto the wiper arm until it clicks into place (follow the blade’s specific instructions if they differ).
- Carefully lower the wiper arm back onto the rear window and run a test sweep to ensure full coverage without interference.
After installation, wipe the window to confirm a clean, even contact across the glass and listen for any unusual creaking or scraping that could indicate a loose fit.
Summary
For the 2019 Honda Odyssey, the rear wiper blade is typically 11 inches long. When replacing, choose an 11" blade with a compatible connector for your wiper arm, and decide between OEM or aftermarket options based on cost and performance preferences. Always verify compatibility on the packaging or by checking your vehicle’s manual, and test the new blade to ensure proper operation.