The rear wiper blade size for the 2016 Honda HR-V is 11 inches.
The HR-V uses a single rear blade mounted on the tailgate, and the standard replacement size cited by owners manuals and aftermarket catalogs is 11 inches (about 28 cm). Market variations are uncommon, but it’s wise to confirm by measuring the blade you currently have or checking your vehicle’s manual.
Confirming the correct size for your HR-V
Most 2016 HR-V models require an 11-inch rear blade. If you suspect a different size due to a regional variation or a non-standard fit, measure the blade edge from tip to tip or consult the owner manual for precise guidance.
- OEM Honda rear wiper blades labeled 11 inches
- Aftermarket 11-inch blades from Bosch (Specialty/Exact Fit lines)
- Aftermarket 11-inch blades from Trico (Exact Fit or Integral lines)
- Other reputable brands offering 11-inch rear blades compatible with Honda tailgate mounts
Choosing an 11-inch blade will ensure proper coverage and a secure fit on the HR-V’s rear window.
How to replace a rear wiper blade
Replacing the rear blade is a quick maintenance task you can do at home in minutes. Below are the basic steps to guide you through the process.
- Lift the rear wiper arm away from the window to gain access to the blade.
- Locate and press the release tab or mechanism to detach the old blade from the wiper arm.
- Remove the old blade by sliding it out of the connector or adapter.
- Attach the new 11-inch blade to the wiper arm, ensuring it locks into place with a click or snap.
- Lower the blade back onto the window and run a quick test wipe to verify proper operation and coverage.
With the blade properly installed, you should see clean, streak-free coverage across the rear window. If it doesn’t fit, recheck that you have an 11-inch blade and the correct adapter type for your specific HR-V model.
Tools and tips
No special tools are usually required for a rear-blade swap, though wearing gloves and having a clean cloth handy can help keep the area free of fingerprints and debris.
Market variations and maintenance tips
In rare cases, regional variants or dealer-installed options might use a slightly different blade length. Always verify by measuring the blade edge or consulting the vehicle’s manual. Regularly inspect the blade for cracks or missing rubber and replace it if you notice streaking or poor visibility during rain.
Summary
For a 2016 Honda HR-V, the rear wiper blade size is 11 inches. Replace with an 11-inch blade from OEM or reputable aftermarket brands, and follow the simple steps to swap the blade. Verify compatibility if you’re in a market with regional variations, and test the wiper after installation to ensure clear, streak-free visibility.