The rear wiper blade for most BMW X2 models is 11 inches long (about 280 mm).
Sizes can vary by model year and market, so it’s a good idea to double-check your specific vehicle before purchasing a replacement blade.
Confirming the correct size for your X2
Because BMW uses a single rear wiper on the tailgate, the blade is sized to clear the rear window effectively. The standard length you’re most likely to need is 11 inches, though there can be minor variations by year or regional spec.
11 inches (280 mm) is the typical specification used by the BMW X2’s rear wiper system. If you’re unsure, verify by measuring the current blade or consulting the owner’s manual or OEM parts catalog.
Typical rear wiper size for the X2
In practice, the majority of BMW X2 rear wiper replacements are listed as 11 inches in length.
- 11 inches (280 mm) – standard for most X2 models (F39, 2018–present).
If you’re shopping for a blade and the listing doesn’t clearly say 11 inches, measure the blade on your car or compare it to an OEM specification to confirm compatibility.
How to verify the size on your X2
To be certain you get the right blade, follow these quick checks:
- Look at the blade currently installed on your tailgate and measure end-to-end from tip to tip.
- Consult the owner’s manual or a BMW parts catalog using your vehicle’s VIN to confirm the exact size.
- Ask a dealer or parts counter to confirm that an 11-inch blade is listed for your model year and market.
Verification helps avoid ordering the wrong size, especially if you live in a country with regional variations in part specs.
Where to buy and replacement options
You’ll find OEM and aftermarket options that fit the BMW X2 rear wiper blade length. Be sure to choose an 11-inch blade unless your verification steps indicate a different size for your specific vehicle.
- OEM replacement blades sold by BMW dealerships or authorized parts retailers (typically listed as 11 inches).
- Aftermarket brands such as Bosch, Valeo, and Denso that offer 11-inch rear wiper blades compatible with BMW tailgate arms.
When purchasing, check for adapters or j clips that match your tailgate wiper arm design to ensure a secure fit and proper operation.
Step-by-step replacement tips
If you’re replacing the blade yourself, follow these steps.
- Gently lift the wiper arm away from the rear window until it stays upright.
- Find the release mechanism on the blade connector (clip or hook) and release the old blade.
- Slide the old blade out of the adapter and detach it from the arm.
- Attach the new blade by inserting it into the adapter until it clicks into place.
- Lower the wiper arm back onto the window and test the wipe to ensure proper contact and coverage.
Tip: If you’re unsure about the blade’s compatibility, bring the old blade to the parts counter or use your VIN to look up the exact 11-inch specification for your X2 model year.
Summary
For the BMW X2, the rear wiper blade size is most commonly 11 inches (280 mm). Confirm your exact size by checking the current blade, the owner’s manual, or the official BMW parts catalog for your model year and market. Replacement is straightforward and widely available from dealers and aftermarket suppliers.
Additional notes
Always verify compatibility before purchasing, especially if you have a non-U.S. market model or a special edition. A correctly sized blade ensures clear rear visibility and optimal wiping performance.