The rear wiper blade for the 2018 Honda HR‑V is 12 inches long (about 30 cm). This size covers the common US‑spec and many global variants from 2016 through 2021; always verify by measuring your current blade or checking the owner’s manual if your market uses a different specification.
Size and fitment for the HR‑V
For most 2018 HR‑Vs, Honda and major aftermarket retailers list a 12‑inch rear blade. If your vehicle has a different market specification, confirm by inspecting the existing blade or consulting the owner's manual.
How to verify the correct size
To verify before buying, consider these checks:
- Check the owner’s manual for the rear blade size listed for your region and trim.
- Inspect the current rear blade length by measuring from the tip of the blade to the center of the mounting point.
- Look for a size label on the blade itself or on its packaging when replacing.
- Confirm the mounting style of the rear wiper so you buy a blade with the correct connector.
Once you confirm the blade is 12 inches, you can proceed with any 12‑inch replacement from OEM or reputable aftermarket brands.
Where to buy and replacement options
Customers can opt for OEM Honda parts or trusted aftermarket brands. Always verify the blade length and connector type before purchase.
- Honda OEM rear wiper blade (12‑inch) configured for the HR‑V’s mounting style.
- Aftermarket options from brands such as Bosch, Valeo, and Denso, available in 12‑inch rear blades for the HR‑V.
- Third‑party retailer blades labeled for 12 inches and compatible mounting adapters.
Choosing a recognized brand and verifying a 12‑inch length helps ensure proper fit, optimal visibility, and a longer service life.
Installation tips
Replacing the rear blade on the HR‑V is a straightforward task. Follow these steps to ensure a proper fit and function.
- Gently lift the rear wiper arm away from the glass until it stays upright.
- Press the release tab on the blade’s connector and slide the old blade out of the arm.
- Insert the new blade into the arm until it clicks and is securely in place.
- Lower the wiper arm back to the glass and run a test wipe to verify proper operation.
Note: Some versions may use a small adapter or clip; ensure your new blade includes the correct connector for your HR‑V’s rear wiper arm.
Summary
In short, the 2018 Honda HR‑V uses a 12‑inch rear wiper blade. When shopping, confirm length and connector type, choose OEM or a reputable aftermarket option, and follow simple installation steps to ensure clear rear visibility.