The rear wiper blade on the 2013 Ford Escape is 11 inches long (about 280 mm).
The 2013 Escape’s rear window wiper uses a single 11-inch blade mounted on the tailgate. This size is standard for most U.S.-market Escapes, though regional variations or aftermarket replacements can differ in connector type or exact fit. To be sure, measure the existing blade or check your owner’s manual or the packaging of a replacement blade.
Size and compatibility
Rear wiper basics
The rear blade on the 2013 Escape is designed for a single-arm wiper on the rear window. Most retailers list an 11-inch blade as the standard size for this model, with compatibility and connector type noted on the packaging.
To help you shop accurately, consider these factors when selecting a replacement blade.
- Length: 11 inches (approximately 280 mm).
- Connector compatibility: Ensure the blade’s connector matches your tailgate wiper arm (common options include J-hook or other adapters). If in doubt, verify with the retailer or check the packaging.
- Brand options: OEM/Ford Motorcraft blades or reputable aftermarket brands (e.g., Bosch, Valeo) that offer an 11-inch rear blade.
- Installation ease: Some blades come with easier-release adapters or locking mechanisms—read the included instructions before purchase.
Conclusion: For the 2013 Ford Escape, 11 inches is the standard rear wiper blade size. Always verify the connector type and measure the existing blade to ensure a correct fit.
How to replace the rear blade
If you’re replacing the blade yourself, follow these basic steps. Note that exact steps can vary by blade type, so consult the replacement’s instructions as well.
- Turn off the vehicle and gently lift the rear wiper arm away from the glass until it stays in a raised position.
- Locate the release mechanism on the blade’s adaptor and press or slide to detach the old blade from the arm.
- Remove the old blade completely and compare it with the new 11-inch blade to confirm fit.
- Attach the new blade by aligning it with the arm’s connector and securing it until you hear a click or feel it lock in place.
- Gently lower the wiper arm back onto the glass and test the wipe to ensure full contact and proper operation.
If you encounter a nonstandard connector or fit, consult the retailer’s guide or a mechanic. Some aftermarket blades use adapters; ensure the adapter is compatible with your 2013 Escape’s rear wiper arm.
Summary
The 2013 Ford Escape uses an 11-inch rear wiper blade. When shopping, confirm the blade length and connector type to ensure a proper fit. OEM Ford/Motorcraft blades and reputable aftermarket 11-inch blades are commonly available, and installation is a straightforward, few-minute job.