The 2010 Chevrolet Traverse typically uses a standard oil filter with a 3/4-16 thread. Most filters for this engine are about 2.75–3 inches tall and roughly 2.5–2.7 inches in diameter. When shopping, rely on cross-references and confirm the exact part number for your specific engine before purchasing.
Engine options and filter basics
What you’ll find under the hood
The 2010 Traverse is commonly equipped with a 3.6-liter V6 engine, and the oil filter size is generally consistent across this engine family. The filter is the spin-on type, accessible for easy replacement, and the exact part number can vary by brand. Knowing the thread size and approximate length helps you pick the right filter from aftermarket suppliers.
Common filter brands that fit this engine include:
- AC Delco
- Wix
- Bosch
- NAPA (and other major retailers’ house brands)
These brands provide cross-reference options for the GM 3.6L engine used in many 2010 Traverse models. Always verify fit by matching the thread size (3/4-16) and filter height to your vehicle.
Concluding note: Stick with a filter that explicitly lists compatibility with GM 3.6L engines and use the store’s cross-reference tool to confirm exact fit for your VIN.
How to verify the correct size and install
Identifying the right filter for your VIN
To ensure you buy the correct filter, start by confirming your engine code (the 3.6L V6 is the typical configuration for 2010 Traverse). Use the current filter as a reference, then check the part number or markings on it. If the markings aren’t readable, use the VIN to pull a parts lookup from a dealer or reputable parts retailer.
Before buying a new filter, consider the following:
- Thread size: ensure it is 3/4-16 to match the mounting threads on the engine.
- Overall size: ensure the filter’s height and diameter fit without contacting nearby components or the oil pan.
- Filtration needs: choose a filter that meets or exceeds OEM specifications for the 3.6L V6.
Concluding paragraph: By verifying the engine code, current filter markings, and the thread/size specs, you’ll confidently select a compatible oil filter for your 2010 Traverse.
Where to shop and cross-reference
When in doubt, consult parts counters or retailer websites that offer VIN-based cross-referencing. Most major brands (AC Delco, Wix, Bosch, Fram, Napa) provide cross-reference filters for the GM 3.6L engine used in the 2010 Traverse. Always double-check the fitment graph or a parts advisor with your vehicle’s VIN to avoid errors.
Summary
For a 2010 Chevy Traverse, the oil filter generally uses a 3/4-16 thread with a typical height of about 2.75–3 inches. Rely on cross-reference guidance from reputable brands and verify with your VIN or the current filter to ensure you purchase the correct size. Regular oil changes with the right filter help keep the 3.6L V6 engine running smoothly.