The 2020 Corolla uses a canister-style oil filter with a 3/4-16 UNF thread, and the most commonly used OEM part is 04152-YZZA1.
Engine and filter type
In the United States and many other markets, the 2020 Corolla is offered with a 1.8-liter four-cylinder engine (and a hybrid variant). Both configurations use a canister-style oil filter that screws into the engine’s oil passage. The mounting thread for the filter is 3/4-16 UNF, a standard size for Toyota four-cylinder applications. Exact part numbers can vary by region or engine code, so it’s wise to verify with your VIN or the local parts catalog.
Part numbers and compatibility
Here are common options that fit the 2020 Corolla. If you are buying aftermarket, ensure the filter is listed as compatible with Toyota 1.8L engines and the 3/4-16 thread. Use OEM or reputable aftermarket brands to ensure proper fit and sealing.
- Toyota OEM: 04152-YZZA1
Note: Other brands may offer cross-references for the same filter size; always confirm compatibility with your exact engine code and market. If in doubt, bring your old filter or VIN to the parts counter.
Installation tips
Before installing a new filter, drain the engine oil, inspect or replace the drain plug gasket if necessary, and lubricate the new filter’s gasket with fresh oil. Install the filter by hand until snug, then follow the manufacturer’s torque guidance (many canister filters require a light additional turn). Do not over-tighten. Refill to the recommended oil capacity and check for leaks after starting the engine.
How to verify the correct size for your vehicle
If you’re unsure about your specific market or engine variant, consult the owner’s manual, service manual, or a dealership parts department. You can also remove the existing filter and compare its thread size and dimensions to a prospective replacement; many aftermarket catalogs list compatibility by engine code (for example, 1.8L Toyota engines) and by the 3/4-16 thread.
Summary
Short take: The 2020 Toyota Corolla typically uses a canister-style oil filter with a 3/4-16 UNF thread, most commonly Toyota part 04152-YZZA1. Always confirm compatibility for your exact market and engine variant via VIN or the local parts catalog, and choose a reputable filter from OEM or aftermarket brands.