The 2010 Toyota Corolla uses a 1.8-liter inline-four engine, delivering about 132 horsepower in most North American trims.
Engine size and overall context
The Corolla’s ninth generation (2006–2013) centers on a single displacement for most markets in the 2010 model year. The standard powerplant is a 1.8-liter four-cylinder, a configuration Toyota has used across this generation to balance efficiency with reliability.
Key specifications for the typical US-spec 2010 Corolla are summarized below:
- Displacement: 1.8 liters (approximately 1,798 cc)
- Engine configuration: inline-4
- Horsepower: around 132 hp
- Torque: about 128 lb-ft (174 Nm)
- Transmission options: 5-speed manual or 4-speed automatic, depending on trim and market
These figures reflect the standard gasoline engine used in most regions for the 2010 Corolla. Some export models or regional variants may have slight tuning differences, but the 1.8-liter size is the defining feature for this model year.
How to verify the exact specification for a specific car
To confirm the precise engine setup on a given vehicle, check the under-hood sticker for the engine code, refer to the owner’s manual, or use the VIN to pull region-specific specifications from Toyota’s official documentation or a trusted database.
Summary
In short, the 2010 Toyota Corolla is powered by a 1.8-liter inline-four engine, producing roughly 132 horsepower and around 128 lb-ft of torque, with transmission options varying by trim and market.