The typical OEM configuration for a 2014 Ford Focus is 12 mm lug studs with a 1.50 pitch on a 5-lug, 108 mm bolt circle, using 19 mm hex lug nuts. Some variations exist with aftermarket wheels, so verify for your exact vehicle.
Key specifications for the lug nuts on this model
The following details cover the essential specifications you’ll need when replacing lug nuts or ordering replacements. The specifics described here reflect the common configuration for the 2014 Focus, though wheels from aftermarket suppliers may differ.
- Bolt pattern: 5 × 108 mm
- Thread size: M12 × 1.50
- Seat type: 60-degree conical (tapered) seat
- Lug nut hex size: 19 mm
These specifications help ensure proper fitment and torque. If your vehicle has different wheels, confirm the exact size and seat type with the wheel or nut manufacturer.
Verification and notes
To be sure you’re using the correct lug nuts, check the driver-side door placard for wheel specs, consult the owner’s manual, or verify with Ford’s official documentation. If you’re replacing with aftermarket wheels, consult the wheel manufacturer to confirm lug nut size and torque requirements, and use the recommended torque to avoid under- or over-tightening.
Common variations
Some owners install aftermarket wheels that require different lug nuts or seat geometries. In those cases, confirm the exact lug nut size, thread pitch, seat type, and torque with the wheel supplier or a qualified mechanic to ensure safe and proper installation.
Summary
For a 2014 Ford Focus, the standard lug nuts are typically M12×1.50 with a 5×108 mm bolt pattern, using 19 mm hex lug nuts and a 60-degree conical seat. Verify against your specific vehicle configuration, especially if aftermarket wheels are installed, and follow the manufacturer’s torque specifications for a safe installation.