The 2015 Honda CR‑V uses lug nuts with M12 x 1.5 threads, a 60-degree conical seat, and a 19 mm hex size. They are typically torqued to about 80 ft-lb (108 Nm).
On a 2015 CR‑V, the wheel studs are 12 mm in diameter with a 1.5 mm thread pitch. The lug nuts are standard conical-seat type (60-degree) and require a 19 mm wrench/socket. If your vehicle has aftermarket wheels or nonstandard spacers, the nut size or seat may differ, so always confirm with the owner's manual or wheel manufacturer.
Key specifications to know
Before sourcing replacements or performing a wheel change, note these core specs.
- Thread size: M12 x 1.5
- Nut seat: 60-degree conical (acorn-style) seat
- Hex size for the lug nuts: 19 mm
- Stud diameter: 12 mm
- Common torque specification: ~80 ft-lb (108 Nm) when tightening lug nuts
With these specifications, you can identify the correct lug nuts for your 2015 CR‑V and ensure proper fitment and safe installation. If your wheels are aftermarket, verify compatibility with the wheel manufacturer.
Tips for installation and safety
Always use aTorque wrench to reach the specified torque, tighten in a star pattern, and re-check torque after a short test drive. Avoid using impact wammers on lug nuts beyond factory recommendations, and ensure the lug nuts are clean and free of damage before installation. If you’re unsure about aftermarket wheels or spacers, consult a professional.
Summary
The 2015 Honda CR‑V generally requires M12 x 1.5 lug nuts with a 60-degree conical seat and a 19 mm hex, tightened to about 80 ft-lb (108 Nm). Always verify with your specific wheels and owner’s manual, especially if aftermarket components are involved.