The stock lug nuts for a 2019 Jeep Cherokee are M12x1.5 with a 60-degree conical seat, used five per wheel on a 5x110 mm bolt pattern, and typically require a 19 mm wrench. This guide outlines the standard specs and how to verify them for your wheels.
Understanding the exact lug nut size is important when replacing wheels or hardware. While the 2019 Cherokee generally uses the same configuration, variations can occur with different trims, aftermarket wheels, or spacers. The following details provide the core specifications to use as a baseline.
Key lug nut specifications for the 2019 Cherokee
Below are the essential specifications to reference when ordering replacement lug nuts or checking your current hardware.
- Number of lug nuts per wheel: 5
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (cone) seat
- Bolt pattern (hub): 5 x 110 mm
- Nut hex size: 19 mm (3/4 inch); some aftermarket wheels may require a different size
These specs reflect the factory configuration for most 2019 Cherokee models with stock wheels. If your vehicle has aftermarket wheels or spacers, verify compatibility with the wheel manufacturer or a qualified technician.
Summary
In brief, the 2019 Jeep Cherokee uses M12x1.5 lug nuts with a 60-degree conical seat, five per wheel, on a 5x110 mm bolt pattern, typically requiring a 19 mm wrench. Always confirm the exact size for your specific wheels and consult your owner’s manual or dealer if you’re using aftermarket hardware.