The 2011 Honda Pilot uses five lug nuts per wheel with a 114.3 mm bolt pattern. The lug nuts are M12 x 1.5 with a 60-degree conical seat; the standard lug nut hex size is 19 mm.
For this model year, wheels and lug hardware are designed to work together with a 5-lug, 114.3 mm pattern and M12x1.5 thread. If you’re replacing lug nuts or wheels, ensure the thread pitch, seat type, and hex size match the factory specifications. Below is a concise breakdown of the key specs and practical notes for maintenance and replacement.
Bolt pattern and lug nut specifications
Before listing the exact numbers, here are the core specifications that influence wheel compatibility and installation.
- Bolt pattern: 5-lug, 114.3 mm (4.5 inches) between lug holes
- Lug nut size (thread): M12 x 1.5
- Lug nut seat type: 60-degree conical (cone seat)
- Lug nut hex size: 19 mm (3/4 inch)
- Wheel studs: 12 mm diameter
- Recommended torque: approximately 80 ft-lbs (108 N·m)
Before each list item, this paragraph explains the scope of the specs provided.
With these specifications, you can source OEM or reputable aftermarket lug nuts that fit the 2011 Pilot correctly. Always tighten to the recommended torque and re-torque after wheel installation or rotation.
Additional considerations
If you’re using aftermarket wheels or different rim packages, verify the bolt pattern, seat type, and thread pitch with the wheel manufacturer or a trusted mechanic. Mismatched lug nuts or improper seating can compromise wheel security and safety.
Summary
For a 2011 Honda Pilot, expect a 5x114.3 bolt pattern and M12x1.5 lug nuts with a 60-degree conical seat and a 19 mm hex. Tighten to about 80 ft-lbs (108 N·m) and re-torque as needed, especially after wheel changes. When in doubt, consult the owner’s manual or a Honda dealer to confirm exact specifications for your trim and wheel package.