The correct oil for most Honda Fits is 0W-20 full synthetic, with an oil capacity of about 3.7 quarts (3.5 liters) when changing the filter. Always verify the exact specification for your model year and region in the owner’s manual or on the under-hood sticker.
Oil type and viscosity guidance
Honda generally recommends a light, energy-saving oil for its modern engines. For the Fit, 0W-20 full synthetic is the standard for most recent model years, though some older or market-specific editions may call for 5W-20 or 5W-30. Always confirm the exact grade for your car in the official manual or service label.
- Viscosity and grade: 0W-20 is the typical specification for modern Fits; some markets or older models may specify 5W-20 or 5W-30.
- Oil type: Full synthetic oil is generally recommended; synthetic blend may be acceptable where full synthetic is unavailable, but check the manual.
- Oil capacity: Approximately 3.7 quarts (3.5 liters) with the filter; always recheck after draining and refilling.
In all cases, use the exact grade and capacity listed for your vehicle year and market. The hood label and owner’s manual are your primary sources of truth.
Oil specifications by model year
Here is a high-level snapshot to help guide you, while noting that exact specs can vary by region and VIN. Always verify with official documentation for your car.
- First generation (2001–2008): Some markets used 5W-20 or 0W-20 depending on climate; consult the owner’s manual for your region.
- Second generation (2009–2014): 0W-20 is common in many regions, with some markets allowing 5W-20.
- Third generation (2015–2020+): 0W-20 is widely standard; confirm with the VIN-specific spec in the manual or dealer materials.
Because regional specifications can differ, use these notes as a guide and always rely on the official documentation for your exact vehicle.
Steps to ensure you use the right oil
To avoid mistakes, follow these practical steps before you buy or drain and refill the oil.
- Check the owner’s manual or the under-hood oil label for the exact viscosity grade and specification for your year and market.
- Choose a reputable oil: 0W-20 full synthetic is the standard for modern Fits; a synthetic blend might be listed only if full synthetic isn’t available.
- Verify the engine oil capacity and refill gradually to reach the recommended level on the dipstick after the new filter is installed.
- Dispose of used oil and the filter at an approved recycling facility or service shop.
Following these steps helps ensure you maintain proper lubrication, fuel economy, and engine longevity.
Where to find the official specification
For the most accurate guidance, consult the owner’s manual, the under-hood oil fill cap, and Honda’s official service resources. Specifications can vary by market, trim, and VIN, so rely on documentation tied to your exact car.
Summary
In summary, use 0W-20 full synthetic oil for most Honda Fits, with an approximate capacity of 3.7 quarts (3.5 liters) including the filter. Always confirm the precise grade and capacity for your vehicle in the owner’s manual or at a Honda dealer, as regional differences exist. Regularly checking the oil and following manufacturer guidelines will help keep the Fit running smoothly.