Two possible engines in the 2010 Camry affect the oil filter part number: the 2.5-liter four-cylinder (2AR-FE) and the 3.5-liter V6 (2GR-FE). The exact filter you need depends on which engine your car has. The best way to be sure is to verify your engine code or check the current filter or owner's manual.
This article explains how to identify the correct oil filter for your specific Camry and provides steps to confirm the right part number for your exact vehicle.
Engine options for the 2010 Camry
The 2010 Camry was offered with two gasoline engines. Knowing which one your car has will determine the correct oil filter replacement.
- 2.5-liter inline-4 engine (2AR-FE): A common Camry engine; uses a cartridge-style oil filter designed for this family.
- 3.5-liter V6 engine (2GR-FE): A larger engine that uses a different filtration setup; confirm the exact replacement part in official documentation for your vehicle.
Because filter part numbers can vary by market and trim, always verify using official sources or the existing filter.
How to confirm the exact oil filter for your Camry
To ensure you buy the correct filter, follow these steps:
- Identify your engine code. It is usually stamped on the engine block or listed on a label under the hood or in your vehicle’s service documents.
- Check the owner's manual or service manual for the recommended oil filter part number for your engine.
- Examine the current filter. The part number or a size specification may be printed on the filter itself; compare this to factory catalogs or reputable cross-reference guides.
- Use VIN-based parts lookup. Enter your vehicle VIN in Toyota's official parts catalog or contact a Toyota dealer’s parts desk to confirm the exact filter for your exact trim and market.
Following these steps helps ensure you purchase the correct oil filter for your 2010 Camry, avoiding mismatches that could affect oil flow or filtration.
Summary
For 2010 Toyota Camrys, the oil filter depends on the engine: the 2.5L four-cylinder (2AR-FE) and the 3.5L V6 (2GR-FE) use different filters. Always verify with your engine code, the current filter, or a VIN-based parts lookup to confirm the exact part number. When in doubt, consult a Toyota dealer or trusted parts retailer to ensure compatibility.
What type of oil filter does a 2010 Toyota Camry take?
So this car takes 4.7 quarts of ZW20 um and the filter is M1C 251A that I find at AutoZone uh it's about 10 bucks and then the oil $27.99 for a 5Q jug over at um Walmart to say the least all right
What type of oil filter for Toyota Camry?
The Toyota Camry oil filter type could be either spin-on or cartridge-style, depending on your engine and the year.
Where is the oil filter on a 2010 Toyota Camry?
And the nut is right there. And also the filter is right here. So I'm going to have to uh first drain the oil replace the filter then fill the oil back up loosen up the nut.
What oil is used for a 2010 Toyota Camry?
Toyota generally recommends high-quality synthetic oil meeting Toyota specifications for the 3.5L V6. Common viscosities used for modern Toyota 3.5L engines include 0W-20 or 5W-30 in some regions—our factory-trained technicians confirm the exact grade by VIN and owner's manual.