The drain plug for a 2013 Honda CR-V generally uses M14 x 1.5 threads and is removed with a 17 mm tool; plan to torque it to about 29–33 ft-lb (40–45 N·m) and replace the copper crush washer at each oil change.
Baseline size for the 2013 CR-V
For the 2013 CR-V equipped with the common 2.4L i-VTEC engine, the oil drain plug is typically M14 x 1.5 in thread size. This is the standard configuration for US-market models, though regional variations can occur. Always verify with your VIN or the official service manual if you’re unsure.
Markets and engine variants
While the vast majority of 2013 CR-Vs use the M14 x 1.5 drain plug, some export or late-year variants may differ. If your vehicle has a non-standard engine option or was manufactured for a different market, double-check the specification before purchasing replacements.
To help ensure you have the right parts, here are the essential specifications at a glance.
- Thread size: M14 x 1.5
- Drain plug head/tool size: typically 17 mm (socket or wrench)
- Torque specification: approximately 29–33 ft-lb (39–45 N·m)
- Washer: replace the copper crush washer with every oil change
These details are intended as a quick reference. If your vehicle’s configuration differs, consult the owner’s manual or Honda service documentation to confirm the exact size and torque requirements.
How to verify the correct size on your car
When in doubt, verify against official documentation and, if possible, inspect the current drain plug or its replacement part to ensure compatibility with your specific CR-V.
- Check the owner’s manual or Honda service literature for the exact drain plug specification corresponding to your trim and engine code.
- Inspect the existing drain plug: read any markings, measure the hex head, and compare with standard M14 x 1.5 plugs.
- Consult a dealer or certified mechanic with your VIN if you’re uncertain about regional variants or aftermarket replacements.
When servicing the oil, ensure you use a new copper washer and wrench the drain plug to the proper torque to avoid leaks or damage.
Summary
For a 2013 Honda CR-V, the standard oil drain plug commonly features M14 x 1.5 threads, with a typical removal tool size of 17 mm and a tightening torque of about 29–33 ft-lb. Replace the copper crush washer at every oil change, and verify variant-specific details with official manuals or a dealer if your CR-V differs from the norm. Following these guidelines helps prevent leaks and ensures proper oil drainage during maintenance.