The typical replacement wiper blades for many Ford Fusion models are 26 inches on the driver’s side and 19 inches on the passenger side, though sizes can vary by year and trim.
The Ford Fusion has evolved across several generations, and blade lengths have changed accordingly. This guide outlines the most common sizes and how to confirm the exact measurement for your specific car.
Common sizes by generation
Below are the blade lengths most often used on Ford Fusion models in the United States. Because there were multiple generations and regional variations, always verify for your exact year.
- 2006–2012 Fusion (first two generations): Driver blade typically around 24 inches; passenger blade commonly 18–19 inches depending on year and trim.
- 2013–2020 Fusion (third generation): Driver blade 26 inches; passenger blade 19 inches.
Bottom line: blade lengths differ by generation, with 26"/19" being the standard for most 2013–2020 Fusions, and smaller 24"/18–19" configurations used on earlier models. Always confirm with your vehicle’s year and manual before purchasing replacements.
How to verify the exact size for your car
To ensure you get the correct blades, use these steps to confirm the exact lengths for your year and model.
- Check your owner’s manual or the official Ford parts catalog for the recommended blade sizes by year and trim.
- Inspect the current blades: measure the length of each blade from end to end with a tape measure to confirm their lengths.
- When shopping, enter your year, make, and model on retailer sites or bring the old blades to the store to match the lengths and adapters.
- Be aware of adapter type: some Fusion models use different blade mounting systems (hook, pin, or side adapters), so ensure the replacement blades include the correct adapters for your arms.
Accurate verification helps avoid purchasing the wrong size or incompatible adapters, especially when replacing blades on older models.
Summary
For most recent Ford Fusions (2013–2020), expect 26-inch driver-side blades and 19-inch passenger-side blades. Older Fusions (2006–2012) commonly use shorter blades, around 24 inches on the driver’s side with 18–19 inches on the passenger side. Because sizes vary, always check your year and trim, measure the current blades, or consult the official parts catalog to confirm exact replacement lengths. Accurate sizing ensures optimal visibility and safe driving conditions.