The 2010 Ford Fusion typically uses H11 bulbs for the low beams, 9005 bulbs for the high beams, and H11 bulbs for the front fog lights if your model includes them.
The headlight setup in the 2010 Fusion can vary by trim and option package. Some models may use HID or projector headlights instead of standard halogen bulbs, which changes the replacement bulb types. Always verify the exact size for your specific vehicle by checking the owner's manual or inspecting the existing bulbs.
Common bulb sizes by function
Below are the bulb sizes you’re most likely to encounter for a 2010 Fusion, depending on the headlight configuration and features of your trim. If your car has different equipment, sizes may vary.
- Low beam: H11
- High beam: 9005
- Front fog lights (if equipped): H11
Using the correct sizes ensures optimal light output and avoids damage to the headlight housing or electrical system.
How to confirm your exact bulb size
To be certain of the precise bulb size for your vehicle, follow these verification steps:
- Consult the owner's manual or the bulb size chart found in the vehicle's lighting section.
- Open the headlight assembly and read the bulb base number printed on the bulb itself.
- Use Ford’s official parts lookup or a trusted parts retailer by entering your VIN to confirm the exact bulb type for your trim.
- If replacing, match not only the type (halogen vs. HID/LED) but also the wattage and connector, to ensure proper fit and performance.
Following these steps helps ensure you purchase the correct bulb size and avoid compatibility issues.
Notes on headlight technology and trim differences
Halogen headlights
Most base and mid-level trims use halogen bulbs. For these, the common replacements are H11 for low beams, 9005 for high beams, and H11 for fog lights if the car is equipped with them. Always verify the exact size for your specific vehicle configuration.
HID or LED headlights
Some higher trims or factory-installed upgrade packages may use HID or LED headlights. In these cases, the bulbs themselves and the replacement process differ from halogen bulbs, and you won’t use standard H11 or 9005 bulbs. If your Fusion uses HID/LED, refer to the manual or dealer–level guidance for the correct replacement procedure and parts.
Summary
For most 2010 Ford Fusions with halogen headlights, expect low beams to be H11, high beams to be 9005, and fog lights (if equipped) to be H11. Verify the exact sizes for your specific trim and configuration through the manual, by inspecting the bulbs, or via an official parts lookup to ensure a correct fit and safe operation.