The common bulb sizes for a 2015 Renegade are: low-beam headlights H11, high-beam headlights 9005, fog lights H11, rear tail/brake/turn bulbs 3157, and backup light 921. Variations exist by trim and market, so verify with the owner’s manual or by inspecting the current bulb in your vehicle.
In practice, lighting configurations can differ between regions and trims. Some Renegade models may equip different front signaling or auxiliary lighting, and factory upgrades or dealer-installed packages can change the bulb types. The following guide summarizes typical sizes and how to confirm them for your exact vehicle.
Exterior lighting bulb sizes
Before listing the sizes, note that these are common for the 2015 Renegade and may vary by trim or region. Use these as a starting point and verify on your car.
- Headlights — Low beam: H11
- Headlights — High beam: 9005
- Fog lights: H11
- Front turn signals: 7440 (some trims may use 3157)
- Rear tail lights and brake lights: 3157
- Rear turn signals: 3157 or 7440 (trim-dependent)
- Backup lights: 921
When replacing bulbs, bring the old bulb to the store to confirm the exact type and consult the owner's manual for any trim-specific notes. If your Renegade has non-standard lighting due to upgrades, the bulb types may differ from the defaults listed here.
How to verify the bulb size for your vehicle
There are two reliable ways to confirm the exact bulb size for your car:
- Check the owner’s manual or the official Mopar parts catalog using your VIN to pull the exact bulb specification for your trim and market.
- Physically inspect the bulb installed in the headlight or taillight housing and note the code printed on the base of the bulb itself.
If you’re unsure, consult a dealership or a trusted automotive parts retailer with your VIN or the exact trim level. They can confirm the precise bulb type and ensure compatibility with any regional variations.
Replacement tips
Before replacing bulbs, prepare the necessary tools and follow these best practices to ensure safety and proper fit:
- Turn off the vehicle, remove the key, and wait for bulbs to cool before touching them.
- Access bulbs according to the manual—some are in the engine bay, others in the wheel well or behind the bumper area—and handle with care.
- Wear gloves or use a clean cloth to avoid getting oils on halogen bulbs, which can shorten life.
- Test all lights after installation and re-seat housings securely to prevent moisture intrusion.
Summary
For a 2015 Jeep Renegade, the typical bulb sizes are H11 for low-beam headlights (and fog lights), 9005 for high-beam headlights, 3157 for rear tail/brake/turn signals, and 921 for backup lights. Because trim levels and regional specifications can alter these sizes, the most reliable approach is to consult the owner’s manual, use the vehicle’s VIN to pull exact specifications, or verify the current bulbs in place before purchasing replacements.