The exact bulb size for a 2012 Honda City isn’t universal; it depends on market and trim. In many common configurations, front low-beam bulbs are typically H11 and high-beam bulbs 9005, with fog lights often using H11 as well. Always verify with the owner’s manual or by inspecting the current bulb to ensure you get the correct replacement for your specific vehicle.
To understand what you may need, this article walks through typical sizes by function, notes market-specific variations, and explains how to confirm the exact bulb type for your car. If you can share your country/region and trim level, I can provide a precise, model-specific list.
Front lighting: headlights and fog lights
These sizes cover the common configurations seen on many 2012 Honda City models. Variations exist by market and trim, so always verify before purchasing replacements.
- Low beam (left/right): H11
- High beam (left/right): 9005 (HB3)
- Fog lights (if equipped): commonly H11; some markets may use H8 or other codes
Because front lighting can differ, confirm the exact bulb by checking the original bulb base or the vehicle’s manual before ordering replacements.
Market-specific notes
In some regions, the City uses alternative bulb ratings for headlights or fog lamps due to regional regulations or trim packages. If you’re unsure, consult the owner’s manual or a dealer’s parts department with your VIN for an exact fit.
Rear lighting and interior/utility bulbs
Rear lighting and interior bulbs are more variable by market and trim. Use these as a baseline, then verify against your specific vehicle.
- Tail/Brake lights (rear combination): commonly in the 7443/7444 family or equivalent dual-filament bulbs on many Honda models
- Turn signals (front/rear): typically 1156/1157 or a similar turn-signal bulb family
- Backup/reverse light: often 921 or 912-type bulbs depending on the assembly
- Dome/map lights and courtesy lights: small wedge bulbs such as 194 or 168 in many cars
- License plate light: commonly a small wedge bulb (often 194 or W5W-type) depending on the local spec
Rear and interior bulb types can vary widely; always verify with your manual or by inspecting the existing bulb socket before purchasing replacements.
How to confirm exact sizes
Use these reliable methods to ensure you buy the correct bulbs for your specific Honda City 2012:
- Check the owner’s manual or the inside cover of the fuse/relay box for bulb specifications
- Remove the current bulb from its socket and read the stamped code on the base
- Look for a label under the hood near the headlight area listing bulb types for each function
- Ask a Honda dealer or parts supplier with your vehicle’s VIN for an exact match
If you’d like, tell me your country/region and trim level, and I’ll tailor an exact bulb-size list for your Honda City 2012.
Summary
There isn’t a single bulb size that fits all Honda City 2012 models. Front headlights commonly use H11 for low beams and 9005 for high beams, with fog lights often H11, but regional and trim differences apply. Rear and interior bulbs vary more widely, with the tail/brake and turn-signal bulbs often falling into the 7443/7440 and 1156/1157 families, respectively, and interior lights typically using small wedge bulbs. Verify each replacement against your specific vehicle using the manual, the bulb itself, or a parts specialist, and share your market/trim for a precise, model-specific guide.