The tire light on a Honda Accord is the TPMS indicator. Reset it by inflating all tires to the recommended cold pressures and retraining the system using either a physical TPMS/SET button or the calibration menu, then driving to complete the relearn; exact steps vary by year and trim.
What the TPMS light means
The TPMS light signals that one or more tires may be underinflated or that the system needs to relearn after tire changes, rotations, or sensor work. Even a small pressure drop can trigger the warning, so it’s important to verify pressures with a gauge and inflate to the door-placard specification before attempting a reset.
Steps to reset the tire light on a Honda Accord
These are common methods used on many Accord models. The exact procedure depends on the year and trim, so if one method doesn’t apply, try the other or consult your owner's manual.
- Check all tires (including the spare if applicable) and inflate them to the recommended cold pressures listed on the door jamb placard or in the owner’s manual.
- If the light goes off after inflating, you may be done. If it remains, proceed with a reset using the appropriate method for your car.
- Physical reset button method (where available): With the ignition on and the engine off, locate the TPMS or SET/RESET button (often under the dashboard near the steering column or knee area). Press and hold it until the TPMS indicator blinks or the light goes out, then release.
- Relaxed relearn drive: After using the button, drive at speeds above about 50 mph (80 km/h) for about 10 minutes to complete the relearn. This allows the system to recognize the new pressures and sensors.
- Infotainment/menu method (for newer trims): If your Accord supports it, go to the vehicle’s Settings > Vehicle > TPMS Calibration (or Tire Pressure Monitoring) > Calibrate/Reset. Confirm and drive as instructed to finish the relearn.
If the light stays on after attempting these steps, re-check all tire pressures, look for a slowed or punctured tire, or a faulty sensor. In some cases, a professional inspection of the TPMS sensors and wheels is necessary to diagnose leaks or sensor faults.
Physical reset button (where applicable)
On some Honda Accord models, the TPMS reset button is a dedicated control located under the dashboard. After inflating tires to the correct pressure, press and hold this button until the TPMS light blinks or turns off. Then drive for several miles at highway speeds to complete the relearn. If your dashboard differs, consult the owner’s manual for the exact location and procedure.
Using the vehicle’s settings/menu (newer models)
On newer Accords, you may reset TPMS through the infotainment system or instrument cluster. Navigate to Settings, then Vehicle or TPMS Calibration, select Calibrate/Reset, and follow the prompts. After reset, drive at highway speeds for about 10 minutes to allow the system to relearn sensor data.
Model-year variations and tips
The exact procedure can vary by generation. For most 2013–2024 Honda Accords, inflating tires to spec is the first step, followed by a reset method that fits the vehicle’s hardware—physical button on some trims or a calibration option in Settings on newer models. If you’re unsure which method your car uses, check the owner’s manual or contact a Honda dealer for guidance specific to your year and trim.
Summary
Resetting the TPMS indicator on a Honda Accord starts with ensuring all tires are at the recommended cold pressures, then performing the reset using either a physical TPMS/SET button or the vehicle’s TPMS calibration option. A short highway drive afterward completes the relearn. If the light persists, inspect tires for leaks or damage or seek professional service to verify sensor functionality.