The fog lights on a 2013 Chrysler 300 typically use H11 bulbs (12V, 55W).
Some trims or aftermarket setups may differ, so it’s best to verify by inspecting the current bulb or consulting the owner's manual or parts catalog for your exact vehicle configuration.
Bulb size and compatibility
Use this quick guide to confirm you have the correct bulb for your 2013 Chrysler 300 fog lights. The list highlights the standard size and how to verify it before purchasing replacements.
- Standard factory configuration: H11 bulbs (12V, 55W) for the fog lights on most 2013 Chrysler 300 models.
- Possible variations: If your car has a non-stock trim, aftermarket fog lights, or a special package, the bulb size may differ.
- How to verify: Compare the current bulb with a replacement showing H11 markings, or check the vehicle’s manual or parts catalog for your VIN.
Conclusion: For the majority of 2013 Chrysler 300s, the fog light bulb size is H11. If you’re unsure due to a non-standard setup, verify before buying a replacement.
Replacement tips and steps
If you’re replacing the fog light bulb yourself, follow these general steps to access and replace an H11 bulb safely.
- Turn off the vehicle and remove the key from the ignition; ensure the headlights and fog lights are off.
- Locate the fog light behind the front bumper. You may need to remove the wheel arch liner or a portion of the bumper cover to access the back of the fog light assembly.
- Disconnect the electrical connector from the back of the fog light bulb socket.
- Twist the bulb holder counterclockwise and pull the old bulb out of the housing.
- Insert the new H11 bulb into the socket, twist to lock, and reconnect the wiring harness.
- Test the fog light to ensure it illuminates properly, then reassemble any trims or liners you removed.
Note: If access is difficult or the light does not illuminate after replacement, consider professional installation or consult the owner’s manual for model-specific guidance.
Further considerations: trim and aftermarket setups
Some 2013 Chrysler 300 models with aftermarket fog lights or non-standard factory equipment may use different bulb types. Always verify with the exact vehicle specifications or consult a parts counter with your VIN to avoid buying the wrong bulb.
Summary
In most cases, the fog lights on a 2013 Chrysler 300 use H11 bulbs (12V, 55W). If your car has a non-stock setup or you’re unsure, check the owner’s manual or inspect the existing bulb to confirm. When replacing, follow careful access and installation steps, and seek professional help if needed.